*Official* Intel Q6600 G0 & B3 overclocking thread

[EarlZ]

Q6600 G0 2.4Ghz 8MB L2 Cache VID 1.275v / Kingstone Value Ram 5-5-5-15 4x2GB (8GB)

FSB : 425Mhz
Multiplier : 8x
Memory Ratio 1:1
Bios Volts : 1.395v
Memory volts : 1.90v
MCH volts : 1.23v
CPU VTT : 1.2750v
GTL REF : 67%

Temperatures nimo? Nindot na imong processor dah swerte. Ako 3.4 Ghz need na 1.325 VTT ahuhuhu

Nawa akong voltage ubos kaayo at stock, ig sugod nako og overclock mo exponentiate ang voltage pod lol

By the looks of it you have a B3 stepping, im using a G0.
Temps would vary depending on the ambient, at 26-27c ambient i get about 58-58-52-52, this is at 3.2Ghz i am still minimizing the voltage i need for 3.4Ghz but i dont go over 63-63-58-58.

On really hot afternoons (32c or higher) it can reach 63-63-58-58 @ 3.2 and 67-67-62-62 @ 3.4Ghz

what's stopping you bro? taas-taas pa ug headroom for voltage on all aspects (vcore, mch, vtt, etc.)...fsb wall or 24/7 use lang ni nimo?

I am only using memories rated at 400Mhz FSB, even if i spend for 1066's i would be limited since im using 8GB


EDIT:

To make it uniform, those who want to post compares please use Prime95 Small-FTT & Real Temp 3.00 with default TjMax values ( 100c )

[Rainerius]

SLACR man akong Q6600 which is a G0 Stepping. Malas lang ko sa VID kay 1.325 leche gyud

[EarlZ]

SLACR man akong Q6600 which is a G0 Stepping. Malas lang ko sa VID kay 1.325 leche gyud

Oh sorry my bad, na libat ko. yes G0.

my results with 3.2Ghz (1.335v), 3.4Ghz is not yet finalized as im still tweaking/testing for voltages lower than 1.395v in bios

[isyot_daut]

here's mine...

bag-o lng ko nag prime ky ako gpang low ang voltages tagsa2x..

[EarlZ]

Nice, how much temps do you get with Small-FTT instead of Inplace-FTT ?

edit:

Im getting 51-51-48-48 using Inplace, bro update diay imong RT 3.00 is already out.

[Rainerius]

100 ang TJMax aning Q6600 G0 sa?

[EarlZ]

100 ang TJMax aning Q6600 G0 sa?

100 to 105, my core0&1 is 100c while core2&3 is 105c

[isyot_daut]

Nice, how much temps do you get with Small-FTT instead of Inplace-FTT ?

edit:

Im getting 51-51-48-48 using Inplace, bro update diay imong RT 3.00 is already out.

sir wat is inplace fft? noob...lol... but im priming with blend test sir....running pa karon...768k passed nah..hehe

ako realtemp ky 2.7 dn tj is 95 lng...hehe 1.20 vtt lng...hehe im planning 3.6 pero 3.4 and 3.6 gamay ra daw difference sa performance...

[EarlZ]

sir wat is inplace fft? noob...lol... but im priming with blend test sir....running pa karon...768k passed nah..hehe

ako realtemp ky 2.7 dn tj is 95 lng...hehe 1.20 vtt lng...hehe im planning 3.6 pero 3.4 and 3.6 gamay ra daw difference sa performance...

SmallFTT fits on the CPU's L2 cache, mas grabi ang stress,power usage and heat generated ana.

Blend test is all about testing the ram actually, minimal kaayo ang CPU heat generation ana, TjMax is supposed to be left at 95c to validate your comparison.. lisod mana mag 95c ka then imong gi compare 100c. latest real temp is version 3.00 as you can see on my images above.

[Rainerius]

Ugma nako mo overclock maayo. Mag back up sa ko. Wala ko salig aning Vista dali kaayo madaot ang system labi na ig cge reset kung mo hang.