DDR2 Question...

[ninzska21]

---

mga bro..

tanong lang..

may DDR2 ako. na 533mhz.. tapos plano ako bibili ng 667mhz.

pwede pa cla ma combine.. o mag conflict sila..?

[cloud]

mga bro..

tanong lang..

may DDR2 ako. na 533mhz.. tapos plano ako bibili ng 667mhz.

pwede pa cla ma combine.. o mag conflict sila..?

pwede but they will run @ 533MHz

[ninzska21]

huhuh

does it make a big difference..

i bought a 667 but it show 533

wierd?

[EarlZ]

If you combined them it should be at 533 since your ram will follow the slowest module around, but if you removed the 533 and placed the 667 you need to properly set the bios dividers for it to run at 667

[ninzska21]

ok...

i did bought a 667.. so did it appear 533.

do i have to set it in the BIOS.

[EarlZ]

ok...

i did bought a 667.. so did it appear 533.

do i have to set it in the BIOS.

Did you combine it with the 533 modules?

[nissanss]

does your MB support the 667DDR2? Coz it's possible that your mem is 667 but your MB is at 533 only. and as one poster said, if u combined it - it will run at slowest module's spec - which is the 533 in ur case.

[butitoy]

not same speed memory pairing will be like dti policy..

lowest rate prevails..if u set it @ 667 in bios..gud luck..

it will not run...if the 533 is a generic and uncapable of reaching 667..

or it may run...overclocking the 533 into 667mhz.. gudluck still...we hope ur 533 will not be cooked off.

solution..

sell ur 533 and acquire another 667 to pair it up.

a same brand..no of chips. cas rating will serve u best..

if not..hopefully it will not bog down the performance..

[brown_dog]

not same speed memory pairing will be like dti policy..

lowest rate prevails..if u set it @ 667 in bios..gud luck..

it will not run...if the 533 is a generic and uncapable of reaching 667..

or it may run...overclocking the 533 into 667mhz.. gudluck still...we hope ur 533 will not be cooked off.

solution..

sell ur 533 and acquire another 667 to pair it up.

a same brand..no of chips. cas rating will serve u best..

if not..hopefully it will not bog down the performance..

Yeah agree
Unless Maybe you have a Corsair Dominator na DDR2 533. sokol na upto ddr2 800. HEhe.

[ninzska21]

yup

support DDR2 667..

my ram is kingston....

ty for the help guyz.