OC addict(DFI-SLI-DR:Corsair)300 FSB BREACHED!! :-D :-D :-D

[muzikfreakah]

---

CHECK LAST POST FOR LATEST UPDATE.
OVerclock natang tanan!
My Overclocking status

Im praying to be stable at 163 atleast
Using Zalman 20 pin only no adapter

was able to make it boot and super PI 1M computation at
263x9.5
CPUV 1.5
1:1 2,3,3,3,11
VDIM:1.9

But im burning it in first at these:
250x9.5
CPUV 1.45
1:! 2,3,3,3,11
VDIM: 1.85

http://www.dfi-street.com/forum/atta...ntid=709&stc=1
__________________
I begin My journey in the alley called DFI street.
OLD
AXP64 3200/939 (Winchester)
Thermaltake Heat Pipe101 with Coolermaster AERO Blower)
im @ 37 degs idle.
DFI SLI-DR and all its goodies.
Corsair TwinXP1024-3200C2 XMS XPERT (512x2) Dual Channel
GECUBE X800XL (Soon to be cooled by ARCTIC COOLING VGA SILENCER 4)
Seagate 80x2 Sata 7200RPM @ Raid Zero. (Main Sysyem not used for overclock testing)
Seagate 80x1 ATA133 7200RPM (Test System for overclocking, First Boot)
WD CAVIAR 160GB 8mb Cache (Data Drive)
LightOn DVDRW SOHW12
L.I.S. LCD (Lost In Space)- Still waiting for Original DFI COM PORT
Coolermaster Aeorogate Fan Controller
WinXP Home SP2, Soon to DUAL BOOT with XP Media Center
Zalman 400A-APF PSu (20 Pin Only no Adapter- Still wondering if this is ok but so far, everything is stable)
[size=18px]LATEST[/size]

[Creed-X]

nice

[killya]

hhmmm... 36 sec. . nice
see you @ the alley..

[muzikfreakah]

Many thinks to the Man coolerguy@arctech for all the help, he is my Overclocking coach, an expert in mem timings and overclocking analysis

See you at the alley killa, my nicks muzikfreakah.

Post your settings on your OC! Ill try to post BIOS screen shots soon if it will help others

No guts no glory, push your clock to the limit! Dont settle for less

[LionHeart]

cool.....

[redlites]

hehehe.. as of now, lipay pa ko sa akong setup. maybe ug mu gawas nang p4 9.0 Ghz, mag sugud nako ug overclock. hehe. pa tabang nya ko ha? hehe. peace

[Shine]

Way to go my friend, looking good. Hey Ry, how are those XMS XPERT working for you?

[muzikfreakah]

Surprisingly VERY WELL!! I was suppost to get the GSKILL but I have a customer who wants it so im resrving it for him, I think with the GSKILL im sure to go over 300+ Im not sure what chip my XMS XPERT is using coz there is now way to find out unless you remove its ARMOR hehehe

All I can say for the XMS XPERT, good 1 of a kind looks (Cool LED DISPLAY), Kick as timings make it a good choice for me

Ok here are some updates:
On DFI-STREET.com I was told by a DFI tech also mod and admin of that site that it isnt good to have half clocks(eg: 150x9.5) so I changed it to 180x9.
Had to change my mem timings CAS2 to CAS2.5 To get this in windows and increase my voltage on both CPU and RAM.

Changed to:
280x9
CPUV 1.5
1:1 2.5,3,3,3,11
VDIM:1.9

Its been 5 hours and 25 minutes on Prime95 Full mem test!

All I can say is, WOOT WOOT!!!!
Im shopping for a new PSU soon coz I was told that 20 pin doesnt work well on a 24 pin slot without the adapter, I really beg to differ and I have proof, but still, Im shopping for a good modular 24 pin 500+wat psu which is very hard to find in Cebu or the Philippines for that matter even from distributors.

[brown_dog]

Nice Mem 250-280mhz @ 1:1.

[avatar_of_woe]

ry, do u have adapters there? 20 to 24 pin?