Fibre glass reinforced, 1 1/4" cut off wheels/disc for dremel/rotary tools 10pcs for 250php

[titaniumbox]

---

Pro Mini atmega328 5V 16M Replace ATmega128 Arduino Compatible Nano

Item Description:
100% New,Arduino-compatible Board.
ATmega328 running at 16MHz with external resonator (0.5% tolerance)
USB connection off board
Supports auto-reset
Max 150mA output
Over current protected
Reverse polarity protected
DC input 5V up to 12V
On board Power and Status LEDs
Size：（Long）33mm *（wide1）18 mm *（high）6mm

Documents:
Pro Mini Eagle Files.zip
Pro Mini Schematic.pdf
Pro Mini Homepage
Getting Started Tutorial

Package Content:
1 x Arduino pro min atmega328p board
3PCS* Pin

Spoiler! 

[titaniumbox]

PFM Control DC-DC USB 0.9V-5V to 5V dc Boost Step-up Power Supply Module @ 200.00php

Description：
1. Input voltage: 0.9-5V DC
2. Mini PFM Control
3. Output voltage: 5V DC
4. Output Current: 500-600mA
5. High conversion efficiency, maximum to 96%
6. Small dimension

Applications:
DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.
In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can directly step-up to 5V.

Package Content:
1 X Mini PFM Control DC-DC USB 0.9V-5V to 5V DC Boost Step-up

Spoiler! 

More sample applications to appreciate it's capability...
Sample 1
Sample 2

[titaniumbox]

Smart car Obstacle avoidance Infrared Sensor module Reflective photoelectric @ 350.00php

((((((SOLD OUT))))))

Item Description:
The light sensor module have strong adaptable to the environment, having a pair of infrared transmitter and receiver, transmitter launch a certain frequency infrared, when meet obstacle in the detection direction, the infrared receiver is reflected back by the receiver tube, after processing through the comparator circuit, the green indicator light will illuminate while the signal output interface output digital signal (a low-level signal) can be adjusted via potentiometer knob detection distance, the effective distance range 2 ~ 30cm, working voltage is 3.3V-5V. The detection range of the sensor can be adjusted by the potentiometer, with little interference, easy to assemble, easy to use features, can be widely used robot obstacle avoidance, obstacle avoidance car assembly line count and black-and-white line tracking and many other occasions.

Parameter:
1. When the module detects an obstacle in front of the signal, the circuit board green indicator light levels while continuing output low signal OUT port, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential control to adjust, adjust potentiometer clockwise, the detection distance increases; counterclockwise adjustment potentiometer, detection distance decreases.
2. The sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The minimum detection distance which black and white max; small area of the object distance is small, a large area from the Grand.
3. The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO
4. The comparator using LM393, job stability;
5. Can be 3-5V DC power supply for the module. When the power is turned on, the red power indicator light;
6. With 3mm screw holes for easy mounting, installation;
7. The circuit board size: 3.2CM * 1.4CM
8. Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.

Interface:
1. VCC external 3.3V-5V voltage (5v microcontroller and can be directly connected to 3.3v MCU);
2. GND an external GND;
3. OUT small board digital output interfaces (0 and 1);

Package Content:
1 x Smart car Obstacle avoidance Infrared Sensor module

Spoiler! 

[titaniumbox]

Infrared reflective Photoelectric Switch IR Barrier Line Track sensor TCRT5000L @ 375.00php

Item Description:
Product Name Track Sensor Module
Output Channel: 1
Working Voltage: 3.3-5V
Detect Distance: 1-8mm
Focal Distance : 2.5mm
PCB Size: 35 x 15mm (L*W)
Hole Size: 3mm/ 0.12"
Material: Electric Part
Net Weight: 3g

Application:
Electric meter pulse data sampling, fax paper shredder detection, obstacle detection, black and white line detection.
Designed with reflected infrared sensor, indicator light.
Built in a potentiometer for sensitivity control.

On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
Support 5 V / 3.3 V voltage input
On-board signal output instructions, output is high effective signal at the same time, the indicator lamp light output signal can be directly and single-chip microcomputer IO connection
Signal detection sensitivity can adjust
Reserve all the way more circuits (P3 voltage drawn)
PCB board size: 35 (mm) x15 (mm)

Package Content:
1 x Infrared reflective Photoelectric Switch IR Barrier Line Track sensor TCRT5000L
4Pin * Dupont cable.

Spoiler! 

[titaniumbox]

IIC I2C TWI SPI Serial Interface Board Module Port For Arduino 1602LCD @ 275.00php

Specification:
This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already have I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)
Supply voltage: 5V
The backlight and contrast is adjusted by potentiometer.
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable.
Compatible for 1602 LCD 2004 LCD.

Material Download at
LiquidCrystal_I2C

Package Content:
1 x IIC I2C Adapter Serial Interface Board Module 5v Arduino 1602 2004 LCD

Spoiler! 

[titaniumbox]

Sound Detection Sensor Module Sensor Intelligent Vehicle For Arduino car @ 250.00php

Specification:
Size:32mm*17mm*8mm(length*width*height)
Main chip:LM393, Electret condenser microphone
Working voltage: DC 4-6V
Signal output indication
Single channel signal output
The output effective signal is low level
When there is sound, outputs low level and the signal light

Can be used for Acoustic control light , give sound and light alarm working with Photosensitive sensor ,and sound control, sound detect

Circuit board output switch quantity

Note: The Maximum induction distance is 0.5M

Package Content:
1 x Sound sensor Module

Spoiler! 

[titaniumbox]

New Arduino RTC DS1302 Real Time Clock Module For AVR ARM PIC SMD

100% Brand new and high quality.
Real time clock with the year 2100 to calculate the seconds, minutes, hours, days, weeks, months, years. As well as the ability for leap year adjustment.

1. Simple 3-wire interface.
2. Vcc = 5V and TTL-compatible.
3. Optional industrial temperature range -40 to +85.
4. Dual power tube for the main power and backup power supply .
5. Wide range of operating voltage 2.0 5.5V
6. Current 2.0V, less than 300nA
7. 31 8 temporary data storage RAM .
8. Serial I / O port pin makes the least number of ways .
9. Read / write clock or RAM data transmission when there are two single-byte transmit and multi-byte character sets transfer mode .
10. 8-pin DIP package or optional 8-pin SOIC package assembly according to the surface .

Size : 44mmX23mmX1.6mm / 1.7''X0.9''/0.06'' ( approach )
Working Temperature: 0℃~+70℃
Operating Voltage Range:3.3v ~ 5V
Note : Do not reverse VCC and GND, will it cause damage
It requires a pull-up resistor for P0 port of 51 MCU, if without, you can connect the data cable to other terminal.

Package:
1 x DS1302 Real Time Clock Module (without battery)

Spoiler! 

[titaniumbox]

Arduino I2C RTC DS1307 AT24C32 Real Time Clock Module For AVR ARM PIC SMD

Brand new and high quality.
This is the DS1307 Real Time Clock developed by one of our designer waiman.
The module comes fully assembled.
The DS1307 is accessed via the I2C protocol.
Two wire I2C interface.
Hour:Minutes : Seconds AM/PM.
Day Month, Date - Year.
DS1307 based RTC without LIR2032 battery
1Hz output pin.
56 Bytes of Non-volatile memory available to user.
Size:2.9cm x 2.6cm - 1.14inch x 1.02inch.

Package:
1 x DS1307 Time Clock Module (without battery)

Spoiler! 

[titaniumbox]

DHT11 DHT-11 Digital Temperature and Humidity Sensor For Arduino@ 150.00php

Description:
1. DHT series numeric humidity sensor.
2. Humidity measuring range: 20％～90%RH(0－50℃temperature compensation).
3. Temperature measuring range: 0～+50℃.
4. Humidity measurement accuracy: ±5.0%RH.
5. Temperature measurement accuracy: ±2.0℃.
6. Response time: <5s.
7. Low power consumption.
8. Size:2.3cm x 1.2cm x 0.5cm.

Package Content:
1 x DHT11 DHT-11 Digital Temperature and Humidity Sensor For Arduino

Spoiler! 

[titaniumbox]

thanks to Kurt from Dalaguete for purchasing one RTC DS1307, just after lunch around 1pm today. driving a grey nissan patrol to my place. YDG xxx

also, to sandies_ph for purchasing cut wheel disc and 2 white COB last week. driving a black avanza.. VEK xxx

this guys are wealthy.. lolz!

as always, plate numbers are noted and any minute detail i can remember .. hehehe. .for my notes and records