OC addict(DFI-SLI-DR:Corsair)300 FSB BREACHED!! :-D :-D :-D

[muzikfreakah]

---

Totally addicted and obssesed.
Help!



[size=18px]TOTALLY UV CRAZY [/size] :8O: :8O:

[noelting]

usik usik lang mo og kwarta!

[muzikfreakah]

Hehehe, hows your thermaltake system diay bai? Wana gana? Let me know if you are selling your robot diay bai katung sa rustans Pag adto nako ngad2 wala na baligya

[muzikfreakah]

Finally got to test my system in transfering videos from my video cam. Well so far, it brings my temps up to:47C well, its also a hot afternoon and no aircon.

I yet have to test it for rendering, once I find out how hehe

[EntrePinoy]

THe sempron 2200+ is a 1.5 ghz processor. Its suppose to run @ 1.5 not 1.2. Please change the jumper to 166.

And man, your system is ok ra gyud nothing to feel down about. The challenge there is if you want something higher.. Hehehe.. Overclock! But there are risks in volved if you do, so make sure you do your research first.

tenkq. and if check nako ang speed sa akong vcrd 4x ni cya sa mobo pero if naa na sa os 2x nalang cya ing ani dyud ni? na set naman dyud ni nako ug 4 x sa board. pero libog ko y 2x lang sa windows. usik man ang 2x nga wla ma activate and about overclock na try na nako sauna sa akong celeron 266 nahimong celeron 433 hehehehe banat kaau pero kuyapan pud lagi akong mga memory tagsa tagsa every month mamatay akong memory. mao stop sa kog oc if mu datu or maka daug ko sa lotto hehehe 100% sure dyud ni nga mu gasto dyud ko para oc hhehehe GAMER GUD TAWN NE... tenx agen bossing

[muzikfreakah]

Make sure you get mems nga kaya nila ma OC. There are a lot of mems nga ma OC nga barato if you look hard enough. Basin ma abtan mig cheap OC mems, ramboo. STill working out the details.

Check daw sa bios again, try setting it to 8x daw and see if ma 4x na niya. Wa pako kasuway ana nga problem da. Whats the brand of your VC? Tryinstalling the latest drivers niya.

[muzikfreakah]

OMG! Just entered 300 FSB!!!
300x8
Mem timings 2.5,4,4,11 1:1 2T all the rest set to auto.
Super PI score was lower thought 1M=38 secs only. As to my normal 34S score.
Temps are really high down so im clocking down. WOnt even attemp to PRime 95 till I get a better cooler.
So my mems can really do it, I think its just really my processor thats llimiting me.
Im going to try 312x8 which is 2500mhz which I can reach normally at 255x10.

[muzikfreakah]

Ok this is the farthest the I tested today coz not feeling that well Too much OC?? hehehe

Lesson learned. Command Per Clock (CPC) is very impoprtant. 1T makes all the difference than 2T. Even though I pushed my mems to reaach 313FSB @ 2T, the results arent that far from my regualr settings which are @ 255x10 2.5,3,3,7 1T (1:1)

Its just nice to know my mems could reach that high an FSB and I think I could still push them further at 2T settings but whats the use e if I would still get the same results.

Well here are the results:

[muzikfreakah]

New sweet spot:
265x10

[muzikfreakah]

Ok, @265x10 stable with PI32M but error with prime. SO lowered it to 261x10. Stable with prime 6 hours. SURPRISINGLY @ 3.2V on my ram, my temps on airconditioned rooms are 40 and 43 on the other. Not much difference actually. What are the threshold temps of TCCD? So running at 3.2 aint safe?