Post Your Benchmark Shots

[[-erick-]]

---

@erick - nice scores, wow @4.5++ cpu speeds unsa mung gamit cooler boss?
@dmelsie - ako nya check bapco sysmark, ga tiwas pako download pcmark, dako2 sad na file hehe

watercooled using alpha cooler.



push ko conti.

highest cpuz ko (dangerous volts na though tapos dili stable for vantage/3dmark)
CPU-Z Validator 3.1

[djlim888]

@erick - Those benchmark are wicked! Thanks for sharing!

[[-erick-]]

@erick - Those benchmark are wicked! Thanks for sharing!

no problem bro. its my pleasure.

at least karon mas daghan2x na nagaOC unlike 3yrs ago.

its much more easier to OC now kay mas daghan na access to better cooling paraphernalia.

OC'ing now to 4ghz is easier than 3yrs ago

[andz]

very nice! Overlock but 99c sa full load ? i can't even dare to do that.. Although naa man autoshutdown ang intel if ma guba na haha

[glide 1]

pheeewwww!! 99deg. is that on water? nice clock though.

here's mine from last year. didn't go further because my ram won't budge past 17++

CPU-Z Validator 3.1

[[-erick-]]

very nice! Overlock but 99c sa full load ? i can't even dare to do that.. Although naa man autoshutdown ang intel if ma guba na haha

ako gi-turn off ang shutdown feature sa coretemp kay mushutdown kung mag vantage na ko. Pero wala pa man ni-kickin ang autoshutdown sa intel

yep, abot 99 kung didto sa cpu test na sa vantage; pero kung magdula ka; hover lang man sa 70-80c; full load cpu lang muabot ug 99-100c.

Suicide run lang mani; kay trying to get past the 220x21 R2E fsb wall. Hahay abot na gani ko ug 1.6v.

kung mag try ko ug 225x20 (1.53v) di jud mu-post;

@glide: Yep its on water (alphacool) ; Pila volts nimo anang 4.6 (219x21) nimo? 1.52v akoa 4.5ht stable; grabe volt ako gibutang para makapatong sa 4.6 kay 1.6v (so mga .5v) ang jump.

try daw sa imo mobo kung makapost ka 225x20. (underclock lang ang mems (set it at 1300+); same ta 1700+ lang pud akoa kaya)
btw naka HT on nang imong 4.5 at 1.3v?

[glide 1]

erick, cant remember - murag 1.44v (220x21) validation lang. will try 225x20 pero murag taas2x na na for my system. Ang procie cguro ok pa. Update lang nya ko diri kung maka lugar ko oc oc

HT on na 4.5ghz @ 1.3v - 1 hr lang sa prime

[simoko]

ako gi-turn off ang shutdown feature sa coretemp kay mushutdown kung mag vantage na ko. Pero wala pa man ni-kickin ang autoshutdown sa intel

yep, abot 99 kung didto sa cpu test na sa vantage; pero kung magdula ka; hover lang man sa 70-80c; full load cpu lang muabot ug 99-100c.

Suicide run lang mani; kay trying to get past the 220x21 R2E fsb wall. Hahay abot na gani ko ug 1.6v.

kung mag try ko ug 225x20 (1.53v) di jud mu-post;

@glide: Yep its on water (alphacool) ; Pila volts nimo anang 4.6 (219x21) nimo? 1.52v akoa 4.5ht stable; grabe volt ako gibutang para makapatong sa 4.6 kay 1.6v (so mga .5v) ang jump.

try daw sa imo mobo kung makapost ka 225x20. (underclock lang ang mems (set it at 1300+); same ta 1700+ lang pud akoa kaya)
btw naka HT on nang imong 4.5 at 1.3v?

grabing pag-puga sa imong D0 oist...ako pud unya ning panamas-tamasan akoa...right now dili gyud ni abused...@1.2v ra(pang daily)...

CPU-Z Validator 3.1

[[-erick-]]

@simoko; dako lagi vdroop niya at stock settings.

yep; puga jud kay hapit na pud dce2010 lol.

either i'll still use this or upgrade

[simoko]

@simoko; dako lagi vdroop niya at stock settings.

yep; puga jud kay hapit na pud dce2010 lol.

either i'll still use this or upgrade

lage...sadly this mobo has no facility for vdroop control...even Load Line Calibration...well at 5k, i could not ask for more...hehehehehe...hopefully maka suroy ko balik sa Davao in time for DCE...bagsik kaayo inyong mga rigs didto...