need any suggestions to improve my new rigs

[reishoto]

---

even if u have vacant spaces, so long as free flowing imong air sa coolers, u should have no worries about heat problems. remember, any space at our pressure and temp can not be made into vacuum by ordinary means. if nagtuyok imong fans dinha, it would realy just suck air at the other end and blows it out at the other end. ayaw na liboga inyong mga kaugalingon.

free space, ok ra na if you have no heat generated anhand dapita, or minimal kaayo. ang problema nimo is if ang i-suck na air sa imong coolers through the fins sa CPU cooler nimo for example is init na daan or naay naka sagabal sa out or intake, thats were it starts to heat up.

things one should consider:

1. CFM of your installed fans (IN and OUT)
2. Air Movement
3. Your Room Temperature

[poldopunk]

i said this a few posts back

[spookey]

even if u have vacant spaces, so long as free flowing imong air sa coolers, u should have no worries about heat problems. remember, any space at our pressure and temp can not be made into vacuum by ordinary means. if nagtuyok imong fans dinha, it would realy just suck air at the other end and blows it out at the other end. ayaw na liboga inyong mga kaugalingon.

free space, ok ra na if you have no heat generated anhand dapita, or minimal kaayo. ang problema nimo is if ang i-suck na air sa imong coolers through the fins sa CPU cooler nimo for example is init na daan or naay naka sagabal sa out or intake, thats were it starts to heat up.

things one should consider:

1. CFM of your installed fans (IN and OUT)
2. Air Movement
3. Your Room Temperature

vacuum = total removal of air or the total absence of air.
vacuum effect = reduced air movement due to wrong configuration or presence of air resistance.

[butchix]

thanks for the info mga masterz, sad to say that i'm too inocents about this.
i dont really know how to position my CM V8, m still searchin in the net the
actual position within a mobo ang V8 coz naglibog ko unsa imo pasabot.
hhheheheheheh sorry bro but honest lang ko kay i dont want nga masayop ko ug
rotate sa akong V8 again kay hasol kaau pagtangtang ugbalik sa mobo sa casing.
anyways it's really a big help to me or to other all ur infos that you shared to me.
i will post my pix again after nako marotate akong V8 ..thanks

@fineupgrades
(or, you can change your intake fan with an FM123 or FM121 fan..)
sir kinsa dealer ani? how muc kaha ni, f u dont mind. tks

[spookey]

here you go bro... a little google and your question has been answered.


http://www.tweaknews.net/reviews/coo..._v8/img/19.jpg
-----------------

http://www.tweaknews.net/reviews/coo..._v8/img/23.jpg
-----------------

http://www.tweaknews.net/reviews/coo..._v8/img/21.jpg
-----------------

http://www.virtual-hideout.net/revie...V8Features.jpg

[kabz]

kundeli baligya na imo v8 ako palit then go for other cpu cooler na mas nicer ang effects.. pm me lang

[butchix]

@spookey
thank u very much bro for the pix...it really helps me a lot...

[fineupgrades]

@TS:

you can buy FM23 & FM121 fans at PCQB, NUTech-SM, Gaisano Interpace-Countrymall, AI Logic, APC, CompuShack, CBX, Vincennt, Andz, and many more..hehehe...pili lang asa mas duol nimo..

[spookey]

@spookey
thank u very much bro for the pix...it really helps me a lot...

bro, just in case imo ilisan imo cooler pwede ra ta swap sa ako zalman 9500 AT.. hehehe...

[butchix]

@spookey
bro thanks for the tip, anyways what do u mean
cooler? u mean the CM V8? well i just keep it
lang muna bro kay ganahan ko sa iya porma.
hehehehehe
@fineupgrades
thanks for the info bro.