naa bay telephone na pwde itaud sa computer then can make a call just like landline?

[spookey]

RJ11 is a telephone wire. He's just going to be using the rj45/cat5 as a very long extension. He is going to solder the RJ11 to the vacant wires at both ends. Then connect it to the phone wall-jack in the room where there is a phone service. Then connect the other end to the phone is in room. The RJ45 connectors are still going to be connected to the router.
I think this solution is too complicated for you guys to understand. Nevermind.

it is a good advise but the risk of noise on the line is high.. noise from phone line will most likely to enter your internet line since they will be running on the same cat5 wire thus your internet transmission will be distorted and you may get disconnected or lag most of the time. better use a separate telephone wire for your phone.

just a piece of advise, just get your own phone line because having a party line is just too much hassle since you may answer a phone call that is not yours.

[coolnezz]

it is a good advise but the risk of noise on the line is high.. noise from phone line will most likely to enter your internet line since they will be running on the same cat5 wire thus your internet transmission will be distorted and you may get disconnected or lag most of the time.

yes. i've considered that issue. it doesn't hurt to try. but i don't see why it should be a problem. isn't that the same principle if you have both DSL & Telephone service from GLOBE, etc. You're just using a splitter to separate Voice and Data. I don't see/notice any degradation in both voice and data.
It's also the same principle for Power over Ethernet (PoE).

[ed168III]

yes. i've considered that issue. it doesn't hurt to try. but i don't see why it should be a problem. isn't that the same principle if you have both DSL & Telephone service from GLOBE, etc. You're just using a splitter to separate Voice and Data. I don't see/notice any degradation in both voice and data.
It's also the same principle for Power over Ethernet (PoE).

tnx a lot bros, bro naa bay splitter from the wire connected at the router?, murag cable t.v(sky cable television) nay splitter mapalit. ang ako kay ang splitter is not from the main source, mo agi sa ug router then splitter (split it inside my room) imo ning sideline bro? ang wire na akong gpalit is from thnking tools, murag 15-20 pesos per meter, basta a wire from router then padung to my computer.

akong gusto kay dli nko mo ask ug favor sa akong sister or tickling there phone again, murag ako ray mangita paagi ba, not interrupting them. naa ka hay way? side line nmo ni bro? tnx a lot. dli sad sla ganhan makakita ug wire gud, n dli sad ko makadrill sa ilang floor. tnx a lot

[chad_tukes]

naay daghan... Vonage, Magic Jack... etc.

VOIP man kaha imong pasabot?

ang downside lang ani is, mag depende ni sa connection sa imong internet. kung bati imong internet connection, don't even think about it. we had our share of nightmares with VOIP. sahay di mu kiring, drcho voicemail. nya what if kung emergency?

pag SKYPE na lang.

[coolnezz]

tnx a lot bros, bro naa bay splitter from the wire connected at the router?, murag cable t.v(sky cable television) nay splitter mapalit. ang ako kay ang splitter is not from the main source, mo agi sa ug router then splitter (split it inside my room) imo ning sideline bro? ang wire na akong gpalit is from thnking tools, murag 15-20 pesos per meter, basta a wire from router then padung to my computer.

akong gusto kay dli nko mo ask ug favor sa akong sister or tickling there phone again, murag ako ray mangita paagi ba, not interrupting them. naa ka hay way? side line nmo ni bro? tnx a lot. dli sad sla ganhan makakita ug wire gud, n dli sad ko makadrill sa ilang floor. tnx a lot

Tickling? Don't you mean Tinkering?

Anyhow... yeah you could say it's my sideline. Doing special/challenging projects like yours. hehe.
And there is no splitter for that, it's a customize hack. Involves cutting and soldering wires without affecting your internet connection. Sorry I'm not in Cebu, otherwise I would do that project for you.