MBR20100CT MBR20100 Schottky Barrier Diodes 100V 20A TO-220
Datasheet:
http://www.onsemi.com/pub/Collateral/MBR20100CT-D.PDF
Spoiler!
MBR20100CT MBR20100 Schottky Barrier Diodes 100V 20A TO-220
Datasheet:
http://www.onsemi.com/pub/Collateral/MBR20100CT-D.PDF
Spoiler!
Servo Tester CCPM Consistency Master Checker Gear Test CCPM Consistency Master Checker 3CH 4.8-6V with Indicator Light
Specifications:
1. Output: ≤ 15mA (5.0)
2. Input: DC 4.2-6.0v
3. Output Signal: 1.5ms ± 0.5ms
4. Size: 46 * 32 * 17MM
5. Weight: 8g
6. Adjustment: manual, automatic, and the median.
Features: The ability to easily detect and configure the server's virtual spaces, jitter and median.
Can be connected to two servos or ESC; MCU control, good stability and high accuracy. Turn the knob, steering can be detected.
If you connect electronic governor (brush or brushless available), you can get rid of remote control devices for manual speed control, used to test tone
Speed or motor performance is very practical, no longer cumbersome to connect the remote and the receiver. It is equivalent to a "hand
Moving receiver "function, analog transmitters to play through the rudder knob
Instructions: Refer to the picture below, then left steering, divided on the lower three groups, which can be accessed three servos; Right single row of pins connected to the supply, close to the edge is negative (to see identification symbol), then the battery negative, be careful not reversed, if the power supply is reversed will burn IC; S identifiers corresponding to the pin, it does not matter. Power on, the blue light will illuminate simultaneously, and then only light left of the first one, in order to manually adjust potentiometers test, press the button, the middle lights, the normalized test; Third lights, automatic testing. ESC test connection and access servos, as you must first take the test motor ESC!
Note: This tester cannot test the servo more than 55 grams servos
Package Included:
1 X Servo Tester
Spoiler!
SG5010 TowerPro Torque Coreless Servo Airplane Boat Truck Digital Servo Futaba E310
Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc...
Great for truck, Boat, Racing Car, Helicopter and Airplane.
Power Supply: Through External Adapter.
Stable and Shock Proof.
- Coreless Motor
- Double Boll Bearing
- Light Weight
- Less Noise
- Connector Wire Length 300mm
Dimensions: 1.57" x 0.79" x 1.44" (40 x 20 x 44mm)
Weight: 1.44oz (39g)
Operating Speed (4.8V no load) : 0.14sec / 60 degrees
Operating Speed (6.0V no load) : 0.11sec / 60 degrees
Stall Torque (4.8V): (8 kg/cm) (110oz/in.)
Stall Torque (6.0V): (11kg/cm) (156oz/in.)
Temperature Range: -30 to +60 Degree C
Dead Band Width: 4usec
Operation Voltage: 3.5 - 8.4Volts
Packing Content:
1 x Original Towerpro SG-5010 Servo Sets (with accessories)
Spoiler!
CD4017 CD4017BE 4017 Dip-16 Decade Counter Divider IC
Spoiler!
Four-wheel motor Spindle gear bag plastic worm gear
Specification:
7 kinds of motor gear, one kind of worm
Module=0.5
Aperture=2mm Teeth=16/14/12/10/9/8 Thickness=5mm
Aperture=1.5mm Teeth=8 Thickness=5mm
Worm Aperture=2mm
Package Include:
1set x Spindle gear bag Four-wheel motor plastic worm gear
Spoiler!
TX-2B DIP-16 TX2B Transmitter Remote Controller with 5 Functions
Datasheet:
https://www.dropbox.com/s/gcahqxbt5b...txrx2.pdf?dl=0
Spoiler!
RX-2B DIP-16 RX2B Receiver Remote Controller with 5 Functions
Datasheet:
https://www.dropbox.com/s/gcahqxbt5b...txrx2.pdf?dl=0
Spoiler!
ULN2803 ULN2803APG ULN2803A DIP-18
8ch Darlington Sink Driver
The ULN2803APG / AFWG Series are high−voltage, high−current Darlington drivers comprised of eight NPN Darlington pairs.
All units feature integral clamp diodes for switching inductive loads.
Applications include relay, hammer, lamp and display (LED) drivers.
Datasheet:
TOSHIBA Semiconductor & Storage Products Company | Europe(EMEA)
Spoiler!
MBR20200CT TO-220 20A 200V Schottky diode
Datasheet:
https : / / w w w. dropbox. com/ s/ gr9x8981r5puin9/ MBR20200CT-D. PDF ? dl =0
Spoiler!
Similar Threads |
|