Windows loading Hang Up

[gaspar_73]

---

use another ide/sata cable...remove ide cable from dvdrom...

[adonisko]

First time i thought the problem s 'n my SATA slot but when i used IDE same problem gihapun. all things u mention here na try ko na except lang sa pag swap sa processor, Boss Gaspar is there possibility nga failure ni sa processor?

[adonisko]

basin nagpa increase ra pod ni ug post count si TS. considering its newbie status... hmmmm

Hindi naman sa ganun Sir A.k.a Explode this is a serious and true to life Computer problem, nagbakasakali lang po na makahanap ako ng solution dito.E kung nagpa increase lang ako ng post count ko idi sana noon ko pa ginawa yan considering that im joining istorya since 2009. Need assistance lang talaga sir kaya nag post ako

[gaspar_73]

you have to isolate each components to rule out which one is defective...it's a tiring process but there's no shortcut.you need some professional help there.asa man diay inyoha?para naay makatabang nimo mga higala nato dire,okey ra ang Alberto's Pizza para nila...heheh.

[jopax23]

ang problema nyan ay iyong motherboard mo...try mo palit nang motherboard o kung hindi ang ram mo...

[eXpLoDe]

@gaspar: pwede ra gani julies ug cokes. hahaha

@TS: as i said before your last resort would be reformatting the pc. but if you have lots of important files, better back it up 1st.

[Vino Kid]

to back it up use external HDD drive controller

[wire]

@adonisko, I've been reading your article and it sounds like none of them were solve your problem? either way, they gave the best shot to your suliran naman.

ok here's the deal. akong balikon ilang procedure (I think sakto to sila pero basin naa lang kay na missed out),

HARDWARE TROUBLESHOOTING:
1) ablihi ang imong CPU
2) phigdaa (ayaw rape-pa huh? kay makiha ta!).
3) adto ka sa BIOS, check the settings, kung ang,

• a) controller naka set ba into IDE/SATA (dili IDD ug dili sa NDD kay long distance nah!) labing dako nga dili jud ang Enhanced kay pang pataas na sa PIKOY!
• b) check ang reading temperature sa imohang CPU.
• c) dapat naka-enable ang logging sa imong BIOS, arun mahibaw-an nato kung naa bay mga ga-deal ug shabu sa Pasil. Mo-patak mana asa para later kung mubalik ang problema at least naa ta mga footprints nila para ma-mahibaloan nato kung unsa jud ang error & related to what? ok?
• d) check ang memory kung sakto ba ang reading sa memory nga naka-install (usahay mag-inintsik bya na or dili mao value nga naka install - meaning naa tay memory issue).
• e) save ang imong trabaho sa BIOS (F10/Save).

4) ipadoul imong dungan sa mga hardware labi na sa HDD ug paminawa ang mga kalihukan dili ba taw-an ang imong,

• a) HDD
• b) Hikapa ang Heat sink kung wala bay gadula ug kayo sa imong Processor - dili ba init kaau, kung mahikap man gani ok ra na pero kung medyo dili kaau "as in" feeling nimo murag init jud, ang imong buhaton nasad kay,
  
  • i) tang-tanga ang heatsink sa imong processor butangi ug Silicon Paste, ug mapalit na nato sa mga computer shop sad ingna lang na sila diha sweto nah. kung dili gani, (kay naa sad ra bay mga tanga nga mga technician, wala kaila ug "laway sa computer" maaU pa ang mga babae sa junquera kabalo pah!)
  • ii) tarunga pag-latag sa Silicon Paste arun mag-meet-up ang duha ka agtang, the processor & the heatsink.
  • iii) Remember to mount & lock properly the heatsink over the motherboard.
• c) paminawa ang Fan sa Video Card (VC) kung gatingog ug gatuyok, labi na ang heatsink niya - kung perti bang inita. (Usually mao ni ang ginatan-awn sa mga ADIK ug Games!)
• d) hikapa ang north bridge ug ang south bridge nga chipset kung dili ba init.
• e) e-feel ang temperature sa overall nimo nga mga parts sa sulod sa CPU by walking your finger (sa uban pah "Fingeraaaaa!") to each part.

SOFTWARE TROUBLESHOOTING:
1) arun walay hasol, Reformat! deretcho. (period) (because, I believe na hardware related na nga issue, since ni kalit ra man kaha ingon ka!) ug wala nay labot ang software side ani. Correct?

I hope nga makatabang ni sa imong mga dakoooooooooooooo kaau nga suliran... Ako jud ni gihaguan ug analyz kay amego bya ta ninyo tanan ari... hehehe

PS: Let me know kung naa gihapon issue, thanks!



Ang inyong tigpamaba ug tagsulat sa thread ngari,

-onin.
visit my Blogsite: ninuruy.wordpress.com

[arki.gerbz]

IMO, reformat mani ing.ani... naka sinati napud ko ani nga problema, di pud ma back-upon kay di man kasud... windows loading ra taman... pag pirmi na ing.ani nga problema after ma reformat kay pasabot hapit na mag retire ang HD

[adonisko]

Proc: Core2Duo
Mobo: ASUS P5KPL-AM SE
RAM: Corsair 2GB DDR2
VC: 9600GT
HDD: 320g SATA Seagate

OS: Windows XP pro VL (licensed)

Problem: hangs up during windows logo boot up

Tried:

Removed: Video card / running on onboard (hangs up on same spot)
Reset: BIOS (jumper reset) compared bios setup with running pc, bios default, identical settings with working pc
Replace: Memory from working PCs (hangs up on same spot) replace it with 3 working pc memory; original memory works on other pc
Replace: HDD from a working PC with same specs (hangs up on same spot) original hardisk works on the other pc
Replace: SATA cable
Replace: IDE HDD (tried reformatting, still hangs up on windows loading setup)
Replace: PSU with a working PC (hangs up on same spot)
Replace: CMOS Battery from a working PC (hangs up on same spot)
Replace: Technician (already asked someone else to look at, said: rare problem) probably mobo or with processor (also replaced thermal paste of proc)
Reformat: tried reformat with Windows XP pro VL (licensed); windows 7 Pro VL (licensed); Windows 7 Ultimate (non licensed) Hangs up on windows logo loading

Processor temperature is normal on hardware monitor
PSU reading is normal on PSU reader

RARE problem; probably with mobo or processor, maybe you guys have been into this kind of problem. Hope someone has already figured this one out. Thanks

Does not auto restart, just freezes on windows loading screen. No error on POST, no BSOD.