pareha ra ang pag cripm from 10meters to 100meters sir.
i'm in a building nga akong gi drop before from 8 floor to ground...and it was working perfectly. =)
pareha ra ang pag cripm from 10meters to 100meters sir.
i'm in a building nga akong gi drop before from 8 floor to ground...and it was working perfectly. =)
yup pareha ra gyod :mrgreen:Originally Posted by djereza
ingon sa nag crimp sa akua, lahi daw pag crimp sa 10 meters ug 100 meters.. kay pag pa crimp nako sa pc express sa una, ako cable kay 30 meters then di ma detect sa ako router, then ako gidala ang router ang cable, ingon sa technician ang pag crimp sa ako cable was for less than ten meters lang, mao gi usab niya crimp.Originally Posted by Apocalypse
naa diay ni?? so far sa mga readings nako usa ra man ak nahibal-an pag crimp ug POWER HOP i mean CROSSOVER diay..Originally Posted by wak_wak
mao man ni ako nahibal-an:
A crossover cable is one that has 568A on one end, and 568B on the other end.
kanang carpark system terminal sa ayala bro mao na ako sample nimo, gkan sa entrance padungg sa exit is 90m dn switch dn 90m padung sa 3rd floor sa opis niladuha ra jud ka klac ang pag crimp sa UTP bro, STRAIGHT ug CROSS, ang straight kay made of two kinds, class A and class B, any class will do, as long dlika mulapas sa 100m limit ok ra na cya, wala kai loss sa imu signal ana, i insist bro na drs something wrong with ur cabling and ur network configuration, so try to check all the network configuration kay murag mahal kaau ang belden na brand.
kinsa man ning technician ba... standard ang pag crimp dli ni cya mag depend sa distance. pa 10m or 100m same ra jud ang pag crimp, either straight or cross ra jud na.Originally Posted by wak_wak
check bai if and setup sa imong router kay BRIDGE or ROUTER, and BRIDGE type kay ang IP (public) kay naa gi butang sa mismong PC so usa ra jud ka pc pwede mo internet. kung ing ani imo setup pwede ka mag ICS, u need another lan card.
kung ROUTER type config na cya then private ip imong makuha, check kung naka dhcp na cya kung wla then enable imong dhcp otherwise tan-awa imong ip address then increment lang.
im not that good sa networking, basta mao ra sulti sa technician na nag crimp sa ako-a cable..Originally Posted by sunyats3n
pc express na pag crimp straight kuno, pero di ma detect sa ako router ang pc using the cable.. pag pa usab na ko crimp ana sya na mao daw di ma detect kay tungod sa pag crimp, sayup kuno.. cge lang if maka balik ko didto mu ask ko niya kung unsa pag crimp..
na sulbad na nehh?
duha ra ang standard sa UTP cable oi.. katong A and B( straight and cross )... then 100m ang pinakata-as... or pinaka layo nga makaya niya...
first i check sa imong router bro.. refer sa gi post ni sunyatsen... to make it sure kong unsay configuration ddto..
2nd.. e check ang gi agi-an sa imong cable. basin na ipit na sya.. or na tupad og electric wire.. di ka ayo na mo matter pero sa standard cabling dapat 1meter away na ang imong UTP cable sa electric wire...
3rd.. check ur lancard....
4th.. testingi kono og butang cable nga less than 20 meters or pede imogn ipa-do-ol jud sa router.. syaro di gihapon...
hehehehe...
Similar Threads |
|