Noob question

[je0frey]

waaaaa Linksys WAG54G diay is not a router, its an adsl modem/router/wireless..
so it means na kani nlng gamiton mo puli sa zyxel modem nimo.
dba naa na ani cya saksakan para rj11..
this will be your setup (dynamic ra dba?)

WAN:
mode =routing
encapsulation=enet encap
multiplex=llc
vpi=0
vci=100
ip add= dynamic

NAT
=SUA only


LAN - LAN Setup

DHCP=server or enable
Client IP Pool Starting Address =192.168.1.100
Size of Client IP Pool =50
Primary DNS Server =203.172.11.21
Secondary DNS Server =203.172.11.25

TCP/IP
IP Address =192.168.1.1
IP Subnet Mask 255.255.255.0

*this Linksys WAG54G lng gamiton nimo kay ADSL/Router/Switch/wirelessna diay ni...

[technowar]

D man mo connect sa internet if sa router nako i-plug ang rj11 sir.

Mao ni ako setup just now:

Router:
Internet IP: 122.54.3.84
Subnet: 255.255.240.0
Gateway: 122.54.0.1
DNS: 58.69.254.12
58.69.254.71

[technowar]

Sa ako desktop:
Internet IP: 122.54.3.84
Subnet: 255.255.240.0
Gateway: 122.54.0.1
DNS: 58.69.254.12
58.69.254.71

Sa ako laptop:
IPv4: 192.168.1.64
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DHCP Server: 192.168.1.1
DNS Server: 192.168.1.1

So dili jud mag-meet ang duha.

[je0frey]

D man mo connect sa internet if sa router nako i-plug ang rj11 sir.

Mao ni ako setup just now:

Router:
Internet IP: 122.54.3.84
Subnet: 255.255.240.0
Gateway: 122.54.0.1
DNS: 58.69.254.12
58.69.254.71

this set up gamit nimo?
WAN:
mode =routing
encapsulation=enet encap
multiplex=llc
vpi=0
vci=100
ip add= dynamic

NAT
=SUA only


LAN - LAN Setup

DHCP=server or enable
Client IP Pool Starting Address =192.168.1.100
Size of Client IP Pool =50
Primary DNS Server =203.172.11.21
Secondary DNS Server =203.172.11.25

TCP/IP
IP Address =192.168.1.1
IP Subnet Mask 255.255.255.0

*pwede sad mao ni dns gamiton nimo
58.69.254.12
58.69.254.71

[technowar]

Wala man koy enet encap nga choice sa encapsulation. Ako encapsulation is RFC 1483 Bridged.

[technowar]

Sir, I got it. Thank you so much for the help master je0frey. Ako ra giusab akong VPI to 0 and VCI to 100. My encapsulation was RFC 1483 Bridged, then put in my DNS servers. Thank you again for helping.

[je0frey]

na set nimo routing ang mode? kay kng bridge direct sa host mkadto ang isp ip nimo.
like this
Sa ako desktop:
Internet IP: 122.54.3.84
Subnet: 255.255.240.0
Gateway: 122.54.0.1
DNS: 58.69.254.12
58.69.254.71

Sa ako laptop:
IPv4: 192.168.1.64
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DHCP Server: 192.168.1.1
DNS Server: 192.168.1.1

dapt nka routing mode ka para ang p from isp route nya sa lan nimo, you laptop and desktop will have local ip lang
check uli sa wan bai..

mode =routing
encapsulation=enet encap
multiplex=llc

ok ,no prob

[technowar]

Sir, dili man pde dynamic ang IP if RFC 1483 Routing ako encapsulation. Wa ko kahibaw unsa ako ibutang sa IP, Subnet, Gateway and DNS servers.

[je0frey]

http://i410.photobucket.com/albums/pp188/je0frey/1.jpg
something like this bai, mga protocols nla same raman na industry standard man na.

[technowar]

this set up gamit nimo?
WAN:
mode =routing
encapsulation=enet encap
multiplex=llc
vpi=0
vci=100
ip add= dynamic

NAT
=SUA only


LAN - LAN Setup

DHCP=server or enable
Client IP Pool Starting Address =192.168.1.100
Size of Client IP Pool =50
Primary DNS Server =203.172.11.21
Secondary DNS Server =203.172.11.25

TCP/IP
IP Address =192.168.1.1
IP Subnet Mask 255.255.255.0

*pwede sad mao ni dns gamiton nimo
58.69.254.12
58.69.254.71

So sa ZyXel diay ko mag-change ani? Abi nako sa linksys. Nahibung gae ko nga akong ZyXel is bridging, then akong linksys 1483 bridged then mka-connect gihapon ko sa net. Ako try sir.