How to network 2 computers with PLDT DSL

[tazman_cris]

---

share sad bro..hehehe

[hotviper]

ok, first
adto sa config sa inyong router (dapat kabalo mo sa password if not reset i dunno if ma reset na kay di man gud inana ako router, sa akong gf ra naka suway rako set up wa sad ko musuway ug reset bwehehe)

set inyong ip to 192.168.1.10 (kanang 10 diha any na), subnet mask 255.255.255.0, default gateway (192.168.1.1)(<-kasagaran default man 192.168.1.1, if di gani ato na ngitaan paagi pag ngita ana, mao ni ang address sa router)

sa mga di kamao asa na e set: settings->control panel->network connection then ryt click local area connection then choose properties, then double click tcp/ip

next ibutang inyong password, default ana murag
Username: admin
Password: 1234

kung kasud namo pislita nang WAN sa left
ang mode dapat routing
ang encapsulation kay ENET ENCAP
multiplexing kay LLC
VPI : 0
VCI : 100 (kani kay ilisdi ni unya kung way internet, either 100 or 35 ni sya murag depende sa lugar)
click obtain ip address then press apply

next

pislita ang LAN sa left
adto sa DHCP setup

DHCP: Server
IP Pool Starting Address: 192.168.1.100 (kani pwede ra sugod mo sa 192.168.1.2 ayaw lang sa 192.168.1.1 kay mao mana ang naa sa router na address)
Pool Size: 10 (kani ikaw bahala ani, unsa ka daghan imong computer sugtan, if 100 na sa taas then 10 ni meaning mga dawaton niya 192.168.1.100 hantud 192.168.1.110)

press apply

kato sa left nasad pislita ang NAT
check ang active network address translation. pili-a SUA only

press apply

then sa left nasad
Maintenance / Tools / Restart, restart

then imong ip address sa imong local area connection change to obtain ip address automatically

then adto sa run type: cmd
then sa console type : ipconfig

if ip address nimo sa local area connection kay 192.168.1.100 na, very good, try dayun internet

ask lang nya for more question ambot klaro raba ni akong pag tudlo hehe, di kaau ko maau anang tutorials

para connect padung sa switch

gikan sa router idritso sa switch

then sa switch na gikan ka mu connect, dritso nasad na.

[hotviper]

I'll be back mga 10 pm post lang if naa mo question, ayaw lang pm ha

[friedrich]

@hotviper:
I came across a forum with the same steps as you have mentioned.
Check this out... http://www.pc-experts.org/index.php?topic=13428.0

This might help for those who has the same question as mine. Haven't tried the steps yet.

[butitoy]

@simoko:

so dili diay pwede i-share ang connection... for 1PC ra jd diay na? toinkies gud.

@butitoy:

thanks for the info, bro. Is it legal?
What are other things i need to configure/change... does the workgroup matters?

in term sof legallity, i think its not bro..if limited to single user ra ur account..

but if multi-user na dsl account..its ok.

does the workgroup matter?...no

.diba magkinahanglan man og cross nga cable bro??

nope..just straight thru..


or another way is

connect the dsl modem to the USB PORT..SHARE the internet connection...

right my network places..properties...

right click the dsl connection..share it ( it will automatically change it's IP into 192.168.0.1 yet maka connect gihapon sa dsl provide..>>>dont manual set this ip sa host pc )

connect this PC thru lan to ur Surecom (EP808SX) 8-Port Ethernet Mini Switch maski asa na slot.


now.. have another cable..conect to ur client pc and to the Surecom (EP808SX) 8-Port Ethernet Mini Switch

...it shud have a lan of course!

configure the IP into...192.168.0.2

subnet ( automatic man ni ) 255.255.255.0


now ( this is important! ) set ur default gateway to ( host ip ) 192.168.0.1


human...

u may maximize ur 8port...just configure the client IPs


enjoy!


tested nako ni...

[friedrich]

dritso rana... palit lang kag 2 streyt thru cable pc1 to your switch and pc2 to your switch... naa nanay internet ang duha ka pc... or better yet i think naay adsl modem/router ang pldt.. pwede ingun ana i request...

I have tried this one last night. I didn't configure anything in the modem. Direcho ra... DSL line to Modem. Modem to Switch then connect nko PC1 and PC2 to the switch and holaahh, naa na internet connection ang duha ka PC.

I don't know what's the pros and cons for this connection and what's the difference between this type of connection to the one HOTVIPER posted above. What do u think guys?

[dmelsie]

questions
mas hinay usb connection kaysa lan network?
if mogamit ka usb then isa sa lan wat if in the long run add ka another pc?
then if isa pc nimo mo act as server if ma off siya wala na net to isa dba?
so therefore the best way gyud gamit og router
then e configure gyud
personal nako na try is kato netgear wgr614 naa option para gamitan siya laing mac adress
sakto mac adress cloning ang term..... effective na siya gyud

[hotviper]

yes murag mao nana, kay pag set nako sa akong gf na pc i came across a webpage pud then ako ra
gi pang suwat sa papel akong gibuhat, nice kay naa nanay screenshot. nalimot nasad ko sa site, e try nya bro
mao nana

@hotviper:
I came across a forum with the same steps as you have mentioned.
Check this out... http://www.pc-experts.org/index.php?topic=13428.0

This might help for those who has the same question as mine. Haven't tried the steps yet.

[hotviper]

i think di na ngn imo bai, di pud ko sure ha hehe. pero nice , basin naka configure nana daan iyang dhcp. which is good kay wa na hassle.
kay sa ako na try sa ngn murag gi bridge mode man gud , if duha ka pc , ang maka una ra kuha ip address ang maka internet nya ang isa wala.

I have tried this one last night. I didn't configure anything in the modem. Direcho ra... DSL line to Modem. Modem to Switch then connect nko PC1 and PC2 to the switch and holaahh, naa na internet connection ang duha ka PC.

I don't know what's the pros and cons for this connection and what's the difference between this type of connection to the one HOTVIPER posted above. What do u think guys?

[friedrich]

Yeah, nice jud bai ky wala nko nag-configure2x. I called PLDT hotline and asked for the VPI / VCI values for Cebu then ingon man to ang agent na wala na daw VPI ang amo line, converted na daw. I don't really understand what she meant about that. hehehe.