PC Problem I need your opinion !

[AMD_infinium05]

---

check your cables...

[xinnuj]

bro, try the power management sa imo settings - control panel den power management if naka set ba og time imo harddisk og monitor ngad2 if naka set put it to never. hope dat would help u..... :mrgreen:

[dexterdal]

check your cables...

Already did, ako ng g swap ang sa primary cable ug secondary cable. Pro same story. Reboot ghapon sya. Clean the PC and all but same story.

bro, try the power management sa imo settings - control panel den power management if naka set ba og time imo harddisk og monitor ngad2 if naka set put it to never. hope dat would help u..... :mrgreen:

Ok ra ang settings sa power management. Wla ang problem d2

[ruelnov]

something is wrong with ur motherboard.

if u want, i can make a straightforward diagnosis and offer to fix that prob permanently:

https://www.istorya.net/forums/index.php?topic=25112.0

[vas_o]

Bro Dexterdal, if you have a friend nga na ay PC try e-install ang imong CD-Rom sa iya PC then observe what will happen sa iya PC. Kung ang result is normal try to borrow ug IDE Cable or buy ka ug second hand IDE Cable basin shorted or something lose in contact and imong existing. If ever will not work try another option just set your CD-Rom to Primary Slave with the HDD Primary Master. Another option nga imo e-observe install your HDD sa IDE-0 without CD-Rom after your observation if ever no problem occur then try install your HDD sa IDE-1 without CD-Rom.

Hope this will help you.

[G_o_R]

bai,

pwede pud nimu i-solate ang problema by stripping the computer down to the basic POST components... try i-observe and computer sa BIOS with mobo, proc, mem and power supply lang. kung mushutdown pagani then its gotta be 1 of 'em...

kung gusto ka i-check nimu ang functionality sa imu cdrom drive... i try ug launch ang win XP reinstallation without your hdd connected para isolated jud ang problem.

hope makatabang ni...

[Tamblot]

I Agree with G_o_R, do the isolation. One component at a time.

I have a case before where my DVD writer just simply disappeared while i was burning. The next time i boot it up, the DVD writer is present but it wont ready any disc. Through isolation, i was able to trace the problem. Its on my IDE cable.

In your case, do the same. Prioritize your suspects. Start from the most priority. You may remove the CD-ROM first and check the stability of the system.

Hope you'll find a fix and have your computer back to work again.

[MegaCool]

Naka sulay pud ko ani.. mukalit lang off ang monitor (pero ang light dli mag blink orange but instead will stay kanang permanent nga green), then ang CDROM drives nako mag steady pud green asta ang HDD activity light..

Ang prob ra kay mura wala kada-og ang power supply kay if ako tang tangon ang fan with LED nako kay mawala ang prob.. or if ipabilin nako ang mga fans then tangtangon nako ang isa ka HD kay maayo man pud..

pwede pud imo mobo, ako gf nga PC kay ingon ani pud prob then palit cla new mobo. hantod karun wala pa mubalik ang prob..

[dexterdal]

thanks guys.

[Mr.De]

Naka encounter namo problem sa inyong pc kanang ig on nimo ok pa then after mga 5 (more or less) minutes mo kalit ra ug off/ restart ang pc, after that ig restart nya dli na sya mo detect sa cd-rom. Ang settings saÂ* CD-ROM is naka master sa secondary IDE. ( wala g overclock ang pc ) Standard ra tanan ang settings.

Dli ba cguro ang akong power supply dli na kadaog sa akong pc, mao mag in ana sya?

Specs sa akong PC

17" ViewSonic Flat Monitor
P4 2.0 Ghz ( Asus P4V533-MX Board )
512 RAM
Sony Combo Drive
80 Gig hard drive

btw
Walay virus ang pc, kay bago ra nako g fdisk/format

Unsay Suggestions ninyo

ang ako lang ma ingon dili compatible imo proccessor ug motherboard i did that in my pc also dili bagay ang iyang proccessor ug mother board pero i try kuno ug set sa auto ang iyang mother board para dili murag ma over clock