Overclocking

[georgelucas]

---

Since our processors are pretty similar why dont you stick with stock FSB first and keep raising the multiplier and see where the clock hits, currently im using 426FSB ( dunno why 425 is unstable ) x8 that gives me 3.4Ghz and I need to pump a pretty high voltage of 1.475v in the bios because of the huge voltage drop on my mobo when the processor is loaded.

And I only trust "Real Temp" for monitoring intel processors, you can google it or grabi it at XS

agree ko nimo sir. naa pod kay point. @TS: try daw ni advice ni sir EarlZ then post nya dri sa imong new clock speed.

[noze]

NOTED:

I have not tried to max multiplier and stay on stock FSB..
and yes I'm using Windows 7 Ultimate 32 bit..
I will reformat soon to 64 bit , but i have no idea yet about the changes of 64bit. (I might have problems when I run some of my apps)
if you have articles that might help educate me about windows 7 ultimate 64 bit, please do post on this thread.

thanks all for the informative reply, I will do your suggestions later 2night. I will Post the result tomorrow

[noze]

Ok heres an update..
Since I don't own any water cooling(Well if you have one to offer , PM me).
I think 3.89 GHz will be my limit..

Tried 12x333 multiplier but will not POST even supplied with 1.5 V

So I went on trying 11x fsb++++

11x341 - 1.3625 V - System Idle surface Temp- 39°
11x345 - 1.3625 V - System Idle surface Temp- 40°
11x349 - 1.3625 V - System Idle surface Temp- 40°
11x350 - 1.4000 V - System Idle surface Temp- 50°
11x354 - 1.4500 V - System Idle surface Temp- 54°
11x344 - 1.4400 V - System Idle surface Temp- 52°

3.86 ghz 1.40 v


3.86 ghz 1.40v


3.86 ghz 1.41v


3.89 GHz 1.49v


3.89GHz 1.45 v


3.89 GHz 1.46V

[werty]

bro why are u increasing your voltage as u up your fsb? did u do some stress test and determined that increasing the voltage will stabilize it? are u hitting a "wall" with the default voltage?

[eXpLoDe]

as you can see in your memory usage.. dili ang full 4gb ang nagamit sa imong windows application because of 32bit OS limit. wala man kaayo changes. regadless ra kung mag install ka ug pang 32bit naay folder sa program files with (x86) and adto ra na ma butang.

[BackBeat]

Try OCCT Stability test for an hour or 15-20mins to see if one of those clocks is stable..

[noze]

I tried the clocks above for 1 hour idle and 15 minutes playing games..
those are the only clocks stable.
Temperature reach 60°C- 68° C at 3.89 GHz when playing games or opening applications like photoshop.

Games played:
H.A.W.X - 1920X1080 FULL GRAPHICS
COD BLACK OPS - 1920X1080 full graphics but with 4x AA only .. frame rate is a lil low (probably 28-35 fps) maybe due to my vcard its only ati radeon 4770 (kinsa namaligya ug 5770 diha.....)

bro why are u increasing your voltage as u up your fsb? did u do some stress test and determined that increasing the voltage will stabilize it? are u hitting a "wall" with the default voltage?

Dili man gud ka POST kung lower voltage. unya ako pa gyud patas-an kung dili stable, ma stable man ug patasan Voltage.

as you can see in your memory usage.. dili ang full 4gb ang nagamit sa imong windows application because of 32bit OS limit. wala man kaayo changes. regadless ra kung mag install ka ug pang 32bit naay folder sa program files with (x86) and adto ra na ma butang.

Thanks for the info about x86 folder sa program files..
Yes I,m aware of the 3.25GB usable only.. Ig reformat nako sunod I 64 bit na nako ang OS para sad maka Puno ko ug memory.

[werty]

wala ko makasabot sa imo gibuhat.. coz sa imo posted na pics u stated the same speed 3.89Ghz but with different voltages...

and to test stability, use stress programs like prime95, dili kai mag idle ka 1hr, games 15mins >.<

[SirJeff]

i wonder what's gonna happen to Pentium D kung e-overclock sad cya...

[noze]

wala ko makasabot sa imo gibuhat.. coz sa imo posted na pics u stated the same speed 3.89Ghz but with different voltages...

and to test stability, use stress programs like prime95, dili kai mag idle ka 1hr, games 15mins >.<

heheh, salamat sa reply...

Actualy thats just the first part..

kung stable ko sa idle 1 hour then games 15 minutes,
next I stressed CPU up to 100% by running 100 instance of looping batchfile.
ako ra na gi try kung unsa ang pinaka gamay nako nga voltage pwede gamiton..

last will be prime 95.. I will be posting soon..

Question: mo affect ba sa temp kung i reduce ang core voltage?