6.3V 3300uF-7pcs and 16V 1500uF-3pcs

[21guns]

hesos ko mga ginoong gagmay,,,pangahoy bai sa mga board na guba,,,hehehe

[rayfloyd_170]

nakapalit ko 3300uF 6.3V... ang prob nalang kani 1500uF 16V kay ako napalit 2200uF 16V.... ako gisuwayan murag naka parallel raman ning tulo ka capacitors then naa cya murag surge inig una dili mo power up... ako check ang motherboard tracer igo lang mu light up then kalit off... i think taas rani 2200uF.. ako sa e compute ang values kay kalimot nako relation ani.. read sako ug circuits hehehe.. murag inversely proportional raba ni kung capacitance naka parallel... maytag mu andar nani kay sayang ang board mka support jud ug prescott...


kinsa naa 1500uF 16V diha i need 3 pcs...

[minimouse]

again , go for the next lower commercial value. happy experimenting. in that way you can learn many things.

[werty]

inversely proportional, if naka series ang capacitors(1/CT = (1/C1)+(1/C2)+etc+etc), add nya sya ang value kung naka parallel (CT=C1+C2)

since ang dapat nimo ilisan is 3x1500uF = 4500uF, try experimenting with 2x2200uF = 4400uF, at least this way mas duol sa iya true value sa orig circuit.

be sure u GROUND yourself while doing the repairs...

[rayfloyd_170]

inversely proportional, if naka series ang capacitors(1/CT = (1/C1)+(1/C2)+etc+etc), add nya sya ang value kung naka parallel (CT=C1+C2)

since ang dapat nimo ilisan is 3x1500uF = 4500uF, try experimenting with 2x2200uF = 4400uF, at least this way mas duol sa iya true value sa orig circuit.

be sure u GROUND yourself while doing the repairs...

wow thanks kaayo bro... im enjoying alot ani.. hehehe...


just wanted to ask if 2 ka 16v 2200uF ako ibutang then i have to omit 1 capacitor kay 3 man ang original... okay ra kaha walay isa ka capacitor noh?

hehehe cge ako suwayan bro...

[rayfloyd_170]

again , go for the next lower commercial value. happy experimenting. in that way you can learn many things.

bro naa 1000uF then 16V... mao naman ni next na lower.. pwede ra kaha 3 pcs ani? ako pud suwayan gi ingon ni werty... thanks bro..