multiple Wireless Access points

[junmar4]

cge salamat2x testing na nya ko upgrade nig palit namo bago router. btw unsa difference sa bridge og repeater? nag research nko pero ga libog ko.

are you referring to repeater vs repeater bridge?

if so, sa repeater (secondary router), only the group within that router can see the workstation in windows network.

while sa repeater bridge (secondary router), apil ang workstations/computers sa primary router makita niya as if usa ra ka router ilang gikonektahan even though 2 ka routers (primary -connected to the modem ug secondary-connected sa primary router, either wired or wireless) imong gigamit.

[tiyans]

kana bro. lamatz wa nko ga libog.

[Dynielle]

setup a WDS..para usa ra ang makita nga access point..but make sure WDS is supported by both router..kung gusto ka, you can flash your compatible router to DDWRT for WDS..

[boyett]

Bro.. WDS/repeater setup matunga imong bandwidth.-http://www.wi-fiplanet.com/tutorials/article.php/10724_3628576_1

go for AP-Client mode setup, may option kang i-wire.. pwede ka sab magbutang ug wireless.

Router/AP ------AP-Client mode---switch

Router/AP ------AP-Client mode---AP

wireless setup nga akong gihimo (outdoor setup, kung indoor imong i-setup gamay ra imong gasto)..







Ayaw kataw-i akong cantenna kay nagdaginot lang ko (functionality is all i need) hehehe...







Mao ni AP-Client mode( with D-Link switch) naka connect ni sa AP1 (see pics sa taas), pwede ni nimo butangan ug dedicated AP para dili matunga imong bandwidth... pinakalayo nako nga na setup ng AP-Client mode is 224 meters (see google grab pic.).

[sleepydeepeyed]

nice bro ...giunsa nimo paghimo..pwd ngayo diagram ,configuration ug devices nga gigamit ?thanks

[Chipmunk888]

Bro.. WDS/repeater setup matunga imong bandwidth.-http://www.wi-fiplanet.com/tutorials/article.php/10724_3628576_1

go for AP-Client mode setup, may option kang i-wire.. pwede ka sab magbutang ug wireless.

Router/AP ------AP-Client mode---switch

Router/AP ------AP-Client mode---AP

wireless setup nga akong gihimo (outdoor setup, kung indoor imong i-setup gamay ra imong gasto)..







Ayaw kataw-i akong cantenna kay nagdaginot lang ko (functionality is all i need) hehehe...







Mao ni AP-Client mode( with D-Link switch) naka connect ni sa AP1 (see pics sa taas), pwede ni nimo butangan ug dedicated AP para dili matunga imong bandwidth... pinakalayo nako nga na setup ng AP-Client mode is 224 meters (see google grab pic.).

hehehe, nindot ni. save cost kaayo bai.



na affected ba ang performace sa ap bai sa metal sa lata nga nagprotect? hinoon naka LOS..



_

[crx]

nice setup.

[boyett]

nice bro ...giunsa nimo paghimo..pwd ngayo diagram ,configuration ug devices nga gigamit ?thanks

bro. dali ra maghimo...

1. iconfigure AP/wireless router, butangi og password (pero kung generous ka ayaw na, para malipay si imong silingan...hehehe) gamit nako TL-WA601G, 2HP ug M2 Bullet (screen grab 2HP) .





Antenna Upgraded




2. iconfigure imong Client side nga AP. TP-Link TL-WA701ND, TL-WA601G, ug 2HP Bullet akong gamit. Kung nagpassword ka sa imong AP/wireless router, ibutang sab ang password diri..





3. pangitai ug taas nga signal (LOS) imong antenna then connect....





4. kung indoor imong set-up..ready to go ka na.. pero kung outdoor ibutang waterproof box imong AP. IP 55 nga box akong gigamit...

9 ka Client AP (8 TP-Link, 1 2HP) ang nakaconnect tanan Cantenna lang ang ako gamit....



hinaut nga nakatabang kini...