...Cannot Install OS :D

[JemjunXpress]

---

ok ako lang e shared ninyo lage! samok oi!

pero unya na buzy pako!

daghan costumer ok

[rexdudi]

...yehey!!!

..ni bigay jed!! weee...ty ha...i shared na jud niya...heheheh...

...ako lang I klaro ang porblema

• On PC...ok...(take note wa OS)
• Ako butang ang OS intaller sa optical drive...press any key to boot from DVD...*toink*press ko...
• Load ang intaller....after ma load..whe? "windows failed to start. A recent hardware or software change might be the cause."

...nya istorya daun sa pikas PC

..thanks jowd kaau sa mu tabang ug mu basa...really appreciate your help guys...

[JemjunXpress]

"windows failed to start. A recent hardware or software change might be the cause."

nganu kaha ni?

Now it fails to boot up with the following symptoms:

I get a message saying "Windows failed to start. A recent hardware or software change might be the cause.
mao ni sagaran ang problem sa ako mga frends

To fix the problem:

1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings and click next.
3. Click "repair your computer"

It also gives me the following options:

4. Safe Mode
5. Safe Mode with networking
6. Safe Mode with Command Prompt
7. Last known good configuration
8. Start Windows normally


My actions:
----------

9. When I attempt to proceed using options 4-6, the screen turns black and just hangs there.
10. If I choose option 6, I also get a list of loaded files. The last loaded file message says:

...
Loaded \Windows\system32\drivers\volmgrx.sys
Loaded \Windows\system32\drivers\atapi.sys
Loaded \Windows\system32\drivers\ataport.sys
Loaded \Windows\system32\drivers\msahci.sys
Loaded \Windows\system32\drivers\fltmgr.sys
Loaded \Windows\system32\drivers\fileinfo.sys"
[Please wait...]

11. I tried booting it with the Vista DVD inserted.
It prompts me to choose an OS to start and displays "Microsoft Windows Vista" as the choice.
Upon pressing ENTER, it takes me to Step 1.

12. I changed the boot sequence to boot up from the Dvd drive. It starts up the Windows installation upon reboot.
Upon getting the Vista menu, I choose to Repair my computer.

13. A message comes up that says:
"Windows found problems with your computer's startup options.
Do you want to apply repairs and restart your computer?"

I click on "Repair and restart".

14. Step 1 shows up again. I choose 8. Start Windows normally.
15. The screen shows the Vista icon and Windows Vista starts up ok.
16. I turned off windows Updates and rebooted the computer and it starts up ok.
Copyright Ashlen Consulting Service c 2007 .

done.

I hope naka help ko ninyo mga gwapa og gwapo sa cebu.
mas gwapa og gwapo ang taga bohol
heheh

[rexdudi]

...OLRAYT!!! woot!

...wow! very detailed kaau ang imong gi hatag ha..

...wow, gee thanks..salamat kaau...I really appreciate your help...

..and, sorry if na samok tikaw dha sa imong mga costumers...hehe..thats what I do, mag samok2x



..thanks guys...ako sa suwayan ha..

[rexdudi]

...amf V_V

...mao ra ghapon...

...awa..after nako ma butang ang intallation disc...*loading files*

...after ma load ang fiels sa disc i get this screen:

================================================== ========================

Windows failed to start. A recent hardware or software change might be the problem:

1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and click "next."
3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

File: \Windows\system32\boot\winload.exe

Status: 0xc0000001

Info: The selected entry could not be loaded because the application is missing or corrupt.

================================================== =====================

EDIT:

Pressing enter would result me to a separate screen where I am prompted to choose and Operating System
usa ra ang choice..one with the EMS enabled...I chose that, and as a result...i get back to the error screen (

doint it again I press F8...still...i get back to the error screen...

So I opted to WIndows Memory Diagnostics Tool...and there i found out that hardware problems were detected...

thanks for your time guys...JemJunXpress, dmelsie, and1rew, Rainerius and saginghilaw...I really appreciate It...

I there really is a hardware problem..I'm just gonna beat the hell out of this PC and go straight to the buy and sell section, buy another one for my mom

[and1rew]

@jem

bro why need man i-repair? dili ang OS ang problema ang iyahang HD dili madetect pag install ug OS, btw wa pa na OS maginstall pa lang

nag try ko ana install ko vista home ed. same error akog repair wa gihapon

@rex
bro try lang ayuha pag connect ng sata cable sa HD, or pag huwam sata cables diha na ok, mau pud na same error sa ako last week detect ang HD sa bios pero pag install OS dili ma detect

post dayun imong results ^^

[JemjunXpress]

File: \Windows\system32\boot\winload.exe

Status: 0xc0000001

Have your bios autodetect all your hard drives..or at least the ones that
have an operating system on it. It will then continue the install and you
will have vista running.
Vista doesnt seem to detect the harddrives, and therefore unable to finish
booting from it. So you need to make sure its showing in the bios,
autodetecting.

[JemjunXpress]

mao ni question niya bro

di man ku ka taod ug OS sa ako pc..nganu kaha ni...basta mu kalit lang ug error after ma load ang installation disc sa windows(7, Vista or XP)

...mao ni butang aie

"windows failed to start. A recent hardware or software change might be the cause."

nganu kaha ni?

@jem

bro why need man i-repair? dili ang OS ang problema ang iyahang HD dili madetect pag install ug OS, btw wa pa na OS maginstall pa lang

nag try ko ana install ko vista home ed. same error akog repair wa gihapon

pag chure oi!


ang problem ani bad burn ..DVD installer

pls! check Autodetecting bios!

Have your bios autodetect all your hard drives..or at least the ones that
have an operating system on it. It will then continue the install and you
will have vista running.
Vista doesnt seem to detect the harddrives, and therefore unable to finish
booting from it. So you need to make sure its showing in the bios,
autodetecting.

[and1rew]

bro ingon ni rex detected ang HD sa bios ^_^

chure na chure uy :P ask lang ko way i-repair wa pa man oS? wala man pud na sa installer cguro kay akog experience ato ok ang installer ^^ ug credit pud imong mga source sa net :P

huwat na lang ta cgurado nag install na to karon hehe

[coolnezz]

maybe you should also credit the source:

Musings of a Software Architect.: Windows failed to start. A recent hardware or software change might be the cause.

Now it fails to boot up with the following symptoms:

I get a message saying "Windows failed to start. A recent hardware or software change might be the cause.
mao ni sagaran ang problem sa ako mga frends

To fix the problem:

1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings and click next.
3. Click "repair your computer"

It also gives me the following options:

4. Safe Mode
5. Safe Mode with networking
6. Safe Mode with Command Prompt
7. Last known good configuration
8. Start Windows normally


My actions:
----------

9. When I attempt to proceed using options 4-6, the screen turns black and just hangs there.
10. If I choose option 6, I also get a list of loaded files. The last loaded file message says:

...
Loaded \Windows\system32\drivers\volmgrx.sys
Loaded \Windows\system32\drivers\atapi.sys
Loaded \Windows\system32\drivers\ataport.sys
Loaded \Windows\system32\drivers\msahci.sys
Loaded \Windows\system32\drivers\fltmgr.sys
Loaded \Windows\system32\drivers\fileinfo.sys"
[Please wait...]

11. I tried booting it with the Vista DVD inserted.
It prompts me to choose an OS to start and displays "Microsoft Windows Vista" as the choice.
Upon pressing ENTER, it takes me to Step 1.

12. I changed the boot sequence to boot up from the Dvd drive. It starts up the Windows installation upon reboot.
Upon getting the Vista menu, I choose to Repair my computer.

13. A message comes up that says:
"Windows found problems with your computer's startup options.
Do you want to apply repairs and restart your computer?"

I click on "Repair and restart".

14. Step 1 shows up again. I choose 8. Start Windows normally.
15. The screen shows the Vista icon and Windows Vista starts up ok.
16. I turned off windows Updates and rebooted the computer and it starts up ok.
Copyright Ashlen Consulting Service c 2007 .

done.

I hope naka help ko ninyo mga gwapa og gwapo sa cebu.
mas gwapa og gwapo ang taga bohol
heheh