correct me if im wrong, but i think you can connect both the wireless routers without using wires. i'm not sure if your wireless router supports that. try to search google.
Results 11 to 20 of 33
Thread: Network Setup... Any Suggestions
-
10-29-2008, 10:17 AM #11Junior Member
- Join Date
- Sep 2008
- Posts
- 366
-
10-29-2008, 10:20 AM #12Elite Member
- Join Date
- Apr 2006
- Posts
- 1,298
tried that before but d-link support told me that my model doesn't support it.
Originally Posted by swordfish69
-
10-29-2008, 10:28 AM #13Junior Member
- Join Date
- Sep 2008
- Posts
- 366
man that's so sad. it only defeats the purpose of *wireless* daw. Well then good luck with your setup! as long as it works then go for it! Originally Posted by cloud
-
10-29-2008, 12:43 PM #14C.I.A.
- Join Date
- Oct 2005
- Posts
- 5,761
kong tupad lang ni nga balay, basin ma abot pa sa tupad sa balay ang signal
then usa lang ka router pa andaron
kong di ka abot, wired nalang padong sa balay,
nya switch or hubLast edited by r0mm3L; 10-29-2008 at 12:46 PM.
-
10-29-2008, 12:47 PM #15Junior Member
- Join Date
- Jan 2007
- Posts
- 367
with that scenario bro, need to put a specific gateway/dns common to both, and a sole dhcp server...kay kung i dungan nimo on ang dhcp ana niya, magconflict na cla as to where to lease to (dns and ip)..i recommend disable ang dhcp sa 192.168.0.50.. and have a dhcp server sa 192.168.0.1 as well as dns..usually automatic na cya the moment you plug in a second router...meaning all connection ip leases is only granted by 192.168.0.1,ive tried this with my dl-524 before..it works man...hope im of help !
-
10-29-2008, 01:24 PM #16Elite Member
- Join Date
- Apr 2006
- Posts
- 1,298
okey ako e try balik, but i tried that last night pero wala man mo work. i disabled the dhcp server in router2 192.168.0.50 leaving router1 dhcp server on to lease ip addresses from 2 - 49 that is why my router2 has and ip address of 192.168.0.10 on the WAN side. i will post results when i tried it. Originally Posted by Dynielle
a question what gateway should i use for pc's connected to router2? is it still 192.168.0.50?Last edited by cloud; 10-29-2008 at 01:29 PM.
-
10-29-2008, 02:04 PM #17Junior Member
- Join Date
- Oct 2008
- Posts
- 272
i try ang suggestion ni dynielle..i think its an IP issue...sa ako lang pud ni..! Originally Posted by Dynielle
-
10-29-2008, 02:33 PM #18Junior Member
- Join Date
- Oct 2008
- Posts
- 272
use the LAN IP of the first router as the gateway of the pcs connected to the second router..second router will only act as a bridge..
-
10-29-2008, 03:28 PM #19Junior Member
- Join Date
- Jan 2007
- Posts
- 367
that's right..just use and only use the first router 192.168.0.1 as gateway and dns..
-
10-29-2008, 03:46 PM #20Elite Member
- Join Date
- Apr 2006
- Posts
- 1,298
thanks for those who replied and will post result when i get home.
Reply With Quote
Similar Threads |
|
Posting Permissions
|