Prolink H9200 + Linksys WRT54G = Not working anymore!

[r0mm3L]

---

ngek! basin kinanglan na na process rma

[MyMaria]

ngek! basin kinanglan na na process rma

uhhh. what do you mean?

[bordline]

you know what... nag sige gyud putol2x ang connection.. it's not baya the modem that has the problem kay if ako direct connect ang LAN sa Prolink, ok man the internet, but if i use the router.. mo gana man tuod but after a few hours, guaranteed mawala jud connection saun man kaha ni oi... hassle kaayo sige reset sa router then re-config napod... hageeee

suwayi daw hikap ang bottom sa router kung init bah...hehe

[MyMaria]

suwayi daw hikap ang bottom sa router kung init bah...hehe

ingna ngano?

[istoryanimo]

Overheat ang imong w-router? Linksys router case has a poor ventilation have you notice naay mga buhok-buhok sak2 ba ang term hehehe above the unit.

Mymaria..ask lang ko underwarranty pana? if not... suggest lang ko ha... palit ug bag-o kanang brand Netgear. mao sad na akong gamit.. gkan sa Arctech Solutions (its already closed) sa Banilad palit nako. Until now working pa gihapon.

[r0mm3L]

uhhh. what do you mean?

what i mean is, replacement

[ishmark]

pareha ta ug setup 9200 adsl ug wrt54g linksys router. try changing your ip sa router to 192.168.2.1 nya subnet to 255.255.255.128.. i used to have the same problem cge ka discon ang linksys but direct sa modem ok ra...

i have the 4-port modem from globelines too, no problem with linksys (maybe cuz iya ip sa modem kai 10.0.0.2)

try lng ni...

EDIT: oh
- disable DHCP sa modem and
- enable DHCP sa router

no problem sa wired ug wireless.. no discons unless mu ulan, think nai problema sa wiring namo diri

[jintatsu]

I have the same setup before except that i was using H9200P from globe. How does your setup work? are you using your H9200 as a modem and your Linksys as your router? Imo ba ni sila gi bridge? From the image you posted i think wla ni nmo gi bridge pgkasetup.. right?

you know what... nag sige gyud putol2x ang connection.. it's not baya the modem that has the problem kay if ako direct connect ang LAN sa Prolink, ok man the internet, but if i use the router.. mo gana man tuod but after a few hours, guaranteed mawala jud connection saun man kaha ni oi... hassle kaayo sige reset sa router then re-config napod... hageeee

Nka suway pd ko ani mghang ang akong router. maybe to poor ventilation and because of torrent programs. Since linksys WRT54G v5 gamay nlng ang ram sa router and kung mgtorrent kailangan siya bigger ram for more connection. mao ni akong na google sauna. mao pgset nko sa akong torrent to use smaller connections, so far ok mn.. hehehe..

[cerndels]

Guys, I need your help. Please advise...

I used to have the 4-port Prolink modem and it worked perfectly with the Linksys WRT54G router. But sad to say, I am no longer using that modem provided by Globe and they gave me the crappy Aztech modem which did not come as a surprise when it stopped working in less than 6 hours. To cut the long story short, they replaced it with the other Prolink modem, the H9200 with the single LAN port.

Internet came back; however, I am now having troubles with setting up the router.

I changed the IP Address on the Linksys already as seen below. I also set the Prolink to Bridge&Router.







It actually worked for 12 hours or so. I meant, I was able to use the router with the modem then. But somehow, it just stopped working. I didn't change anything since I solved this issue but now it's acting up on me and it's driving me crazy.

Any help/suggestion would be greatly appreciated. TIA!

we have the same modem and router, for me this works!! just change the ip address of the router to 192.168.3.1 instead of 192.168.2.1(this wont work for me)... and no need to change any settings of the modem.
Ip: 192.168.3.1
subnet mask: 255.255.255.0
DHCP server: enabled
starting ip address: 192.168.3.2
max # of dhcp user: 50

[antonio]

thnks to those who posted about how to make linksys and globe prolink h9200 work in one piece.......... thnks alot... =)