How to network 2 computers with PLDT DSL

[simoko]

---

ang default na setting jud anang sa PLDT kay bridge mode. you have to change that to routing.

mao ba brad? sayanga sa.. murag naa nay paagi pag ilad wa lng ko mka hibaw. hehe

yes...done that(bridge to routing) etc...naka share ko connection for a while untill i got the call from them...i forgot to mention that they are doing a good job in detecting mac spoofing

[butitoy]

no need to buy a router.

simple...

buy another lan card..( if naa onboard na lan ur host pc )

connect the dsl model to the onboard lan..set the ip to automatic.

now..configure the other lan IP into the simple 192.168.0.1

connect this lan to ur Surecom (EP808SX) 8-Port Ethernet Mini Switch maski asa na slot.


now.. have another cable..conect to ur client pc...it shud have a lan of course!

configure the IP into...192.168.0.2

subnet ( automatic man ni ) 255.255.255.0


now ( this is important! ) set ur default gateway to ( host ip ) 192.168.0.1


human...

u may maximize ur 8port...just configure the client IPs


enjoy!


tested nako ni...

[friedrich]

@simoko:

so dili diay pwede i-share ang connection... for 1PC ra jd diay na? toinkies gud.

@butitoy:

thanks for the info, bro. Is it legal?
What are other things i need to configure/change... does the workgroup matters?

[kornyedison_143]

dritso rana... palit lang kag 2 streyt thru cable pc1 to your switch and pc2 to your switch... naa nanay internet ang duha ka pc... or better yet i think naay adsl modem/router ang pldt.. pwede ingun ana i request...

[szichri]

sakto sila...KUNG wala ka sa kanang bag-o nila nga NGN network...ako wala swerte...NGN na amo diri part sa Mactan...i tried changing the settings sa ilang dsl modem and plug it sa akong switch...got a call from them and my connection was was blocked until i returned the settings to default(ilang setup)...Pas2x kaayo ang NGN practically no downtime pa gyud but ang drawback is u r allowed one connection...monitor nila via mac addr(dili mo sigi switch).

another way bypass this is set ur router to static...

you can this:
1. in command console type ipconfig /all
2. copy everything on the paper.. ip add, subnet, gateways..
3. go to your routers setup page...
4. set it to static
5. input the number you got on step two..
6. everything leave it as is...

tested and worked on my smartbro connection...

no need to buy a router.

simple...

buy another lan card..( if naa onboard na lan ur host pc )

connect the dsl model to the onboard lan..set the ip to automatic.

now..configure the other lan IP into the simple 192.168.0.1

connect this lan to ur Surecom (EP808SX) 8-Port Ethernet Mini Switch maski asa na slot.


now.. have another cable..conect to ur client pc...it shud have a lan of course!

configure the IP into...192.168.0.2

subnet ( automatic man ni ) 255.255.255.0


now ( this is important! ) set ur default gateway to ( host ip ) 192.168.0.1


human...

u may maximize ur 8port...just configure the client IPs


enjoy!


tested nako ni...

diba magkinahanglan man og cross nga cable bro??

[mil]

yes...done that(bridge to routing) etc...naka share ko connection for a while untill i got the call from them...i forgot to mention that they are doing a good job in detecting mac spoofing

hehe.. is it like this sa lapu2x area?

[simoko]

hehe.. is it like this sa lapu2x area?

dili pud tanan bro...diay sila gasugod ug put up aning NGN network nila dapit sa Bankal area but mao na kuno ni ang future sa tanan nilang network...NGN=New Generation Network=No Good Network...hehehehe

[hotviper]

ma share gihapon na, unsa imong router model? katong zyxel?

[simoko]

yes Zyxel bro...pls post your instructions on how to do it...salamat kaayo...

[mil]

hehe.. btw if mao na pls post and share.. ^^