The time has come... - building a new rig :)

[firebasefury]

aw ok ana diay na explode? thanks sa tip bro, still reading kay ako ni try overclock puhon

[eXpLoDe]

@TS: murag naa to gi post dri. regarding sa overclocking error codes. w8 akong ukayon. hehehe

[eXpLoDe]

here it is.

Source: https://www.istorya.net/forums/comput...ed-system.html

BSOD codes for overclocking Sandy Bridge to Be Specific.
0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore... H67/P67 increase/decrease Vcore first then qpi/vtt second.
on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
on i7 32nm SB, usually means too little vCore
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

OT: i hit 3k post. congrats to me. LOL

[EarlZ]

@street_of_no_return: thanks bro, na porma ni tungod sa mga suggestions sa mga tao diri ug labi na jd sa mga tambag ni boss earlz.

@earlz: will try that soon boss. If mag overclock ba, need ba jd mag overclock both CPU and rams?

Nope, you can overclock independently.

here it is.

Source: https://www.istorya.net/forums/comput...ed-system.html




OT: i hit 3k post. congrats to me. LOL

This is for SANDY BRIDGE specific BSOD's

[tdudu]

awwww naporma najud akong paboritong sugilanon sa hardware section. . v-card nlng boss!

[mickopono]

Masakto diay D14 sa K62?

Ayay... murag nindot ni buhaton dah

[EarlZ]

Sakto kaayo kay ATX spec manang K62

[firebasefury]

@Earlz: okies will try to read further. salamat.
@Tdudu: lol, paboritong sugilanon jd hahaha. nice one bro
@mickpono: yup ma arang ra ang noctua nh-d14 sa K62 (though K58 ni ako gi use hehe) pero mag lisod ka ug taud sa isa ka top screw unless imo i-remove sa ang fans sa top.

[firebasefury]

Since kulang pa man ko ug video card I decided mag clean up lang sa ko sa ako cables. Ask lang ko unsay name ani na cable holder? naa baligya ani sa ACE hardware or sa True value?

[jdbebz]

monster ! ! ! rig