New tank arrived, my golly, they mis-aligned it, everything from the bottom up to the base of the tank is the same but the tank itself is a little higher than my older one.
Well this will have to do for now, atleast both dragons are now comfy, as before I had to put one of them in a very small temp tank:
Left= newtank- glass all the way up, top screen doors. Right is old tank, remaining 4 inches of top height is also screen. But since I have semi outdoor setup, I am covering it to prevent moist humid air from coming in. Will add glass to that portion next so I can remove the newspaper, looks dirty with it.
Hiwi(Mis-aligned):
Had to add a "balancer"
So either I will just sell my old tank and make sure they another one exactly the same as the new one or I will just try to add plywood at the base of the of the old tank to raise it higher.
A slave to our pets really.
as for this MVB setup, I am still consulting reptileuv.com (Emailed them) if this is possible and good for both dragons, if not, I will just really have to add another lamp on the second tank. As you can see there is a three inch gap in between, maybe I am loosing some heat or UVB this way:
![]()
Last edited by muzikfreakah; 12-16-2008 at 08:17 AM.
Sir let me know if interested ka, ako baligya nimu kanang naa sa right side kay dili lagi mutupong, bad trop kaayo, paulian lang nako nimu ka ill have another one made nga tupong sa left side.
Let me know kay Ill PM you the price.
Pwede kaayo sad ni pang LGs, daghan kaayo hahaha, breeder tank. Or for you upcoming dragon![]()
wow1 2 tanks na! gosh...sayang dili tupong ang 2!
you should complain with kima sir and have them send someone to saw-off a portion from the aluminum legs of the new tank so that mupantay siya sa 1st tank nimo. i think that's a more easier solution to that minor height difference.although, by doing so, dili na pantay tan-awon ang floor sa 2 tanks...but that's just cosmetic as compared to having your UV lamp level-off between the 2 tanks at the top.
Gilbz due to the 3 inch gap murag mawala ang heat na bro. Dako rakaayo ang space covered sa aluminum between the two tanks. Im still thinking about a solution, pero got another dome na ganiha, gibutangan lang nako ordinary house bulb then maybe ako lang si switch switch.
Maulagi, if I saw it off, dili na matupong sa ubos ang murag gamay nalang ang clearance from the floor bro. Kanang aquarium hinuun, ma lift mana cya from the stand. Plan nako mu add ug plywood to hopefully make up for the difference. That's if wak wak agrees to get it hehe, paulian lang nako para Ill have them make a similar one sa new tank nalang.
now, that tank would look mighty fine with my T.wagleri in it... I could just picture it out, sunning itself while sir gilbz here shoots away with the cam... hehehe...
Feel free to visit anytime, bring your snake and lets schedule a photo shoot lolz!
added second UVB but still observing as yesterday I finally got the right temps. My Digital Thermometer was set to "in", and it has to be set to "out" so all the time my temps were a little high. But this morning at 6am I notice our weather to be a little windy and cold. So I think most likely during lunchtime I will move one MVB to the center shut off the other one then around 3pm use both back on again
6-10am and 3-6pm
10am-3pm
Last edited by muzikfreakah; 12-17-2008 at 07:48 AM.
Similar Threads |
|