.:: Overclocking 101 ::.

[irangejuice]

no.. i ran my 2500+ @ 3200 with 1.725vcore @ 47idle 50load with my zalman.

is your V12 correctly installed and is it running at max rpm?

[jonz]

how bout dz P4 2.6C...? my bios has a overclocking option..10%.. 30%.... 50%... any sugesstions?

[irangejuice]

play with your FSB manually but if you want to do a headache free OC then do the preset OC

[CrasHBURN]

Creed-X: make sure you HSF is installed properly... i sold more than 100 bartons... Max temp is 50-55... didnt had an Athlon to get up to 60 deg C... and by the way, there's no XP3300+ hehehe..


XP2500 @ 2.3GHz... so far.. my processor is multiplier locked man gud.. hehehe.. limit na sa ako memory.

Temp = 45 - 50 deg C with Zalman CNPS7000A-Cu...

[jjjoelll]

mine if not overclock the temp is around 37C and when overclocked temp goes up to 45C to 50C using Zalman CNPS7000A-Cu heatsink... and i think my cpu is running XP3350+... LOL

[jjjoelll]

Volcano 12
Barton XP 2800+ @ 3300+
=2266mhz(11*206) @ 1.725volts, 2.5-4-4-8

idle: 62c
Full: 70c

is this okey?

try the ram timing a little lower... 2-2-3-6 or 2-2-2-5... see if it hang or not... just try! hehehhehe

[jonz]

thr s an overclock option n d bios.......... i tried .... my RAM....... nsunog........ wla na n bot.... nalanay cgro 2 ang processor? heheheheeee

[CrasHBURN]

overclocking = more than 6-8 years of experience, never had a burned CPU and RAM... but killed 2-3 Hard Disks due to PCI raised to 35-40MHz...

[werty]

thr s an overclock option n d bios.......... i tried .... my RAM....... nsunog........ wla na n bot.... nalanay cgro 2 ang processor? heheheheeee

basin imong keyboard mauy nalanay.. kulangan naman ang imo letra sa imong gi type

[Creed-X]

ngutana ko ninyo guys basig sayop ko paginstall sa volcano12...out of the box brand new naa ba nay plastic ang base sa heatsink? basig naa, unya wala nako matangtang o wala ko kita...deretso sad nako install. hehehehe.