MSI's Master of Overclocking Arena 2011

[[-erick-]]

---

yep actually abot 1.78v ang 920 (at 4.6xxghz) pero single core na lisod kay tungod sa volt and temps.

murag 4.2 ang pwede 24/7 kay under 1.2v, gwapo gani imo proc kay less than 1.2v at 4.1 na

[BackBeat]

Sakto ra 4.2 pang 24/7.. beyond that mura'g kuyawan ko unless naay Ok jd nga cooler.. hehe kang master simoko nang less than 1.2v @4.1 rick.. Sa ako 4.1, ni abot nako 1.3v.. hehe

[[-erick-]]

naa pud ko "assignment" nimo BB,

ayaw lang dayon saka ug volt,

ie at 1.2v (sige saka ug 21x200 current) then sunod kay 21x201... until mag bsod siya (meaning dili na pwede ang 1.2v for that particular speed.

gwapo gani mag base clock hunting ka

set ang multiplier to ie 14 (or lowest na pwede sa imoha proc) then hinay saka ang base clock. (ang akong nakuha na base clock for my r2e was 220. so from there kabalo ka asa huntud pwede imo mobo... kuyaw kung makaya nimo 21x225= 4725mhz

[BackBeat]

Nice! haha btaw pd, base clock hunting.. what master simoko told me was to find the lowest vcore @stock fsb.. along the way, raising fsb while reaching to the point nga needed to pump up na ang voltahe.. I did this but wasnt taking notes haha so, pg bsod, bang.. "Unsa na gani to?" haha.. I'll try that rick.. kalingaw na pd OC.. hehe

[[-erick-]]

yep, save your highest OC with the stock volt mao to ang sweetest 24/7 kay long lifespan sa proc + the benefit of a speed bump.

[EarlZ]

@[-erick-]

Bro,

My 2600K's will arrive tom and I'll be binning both for the best OCing performance.. might you be able to give some tips? Will be used on a Gigabyte P67A-UD4-B3 with a D14.

[BackBeat]

Lowest multi is 12.. base clock hunting.. hihi

[[-erick-]]

with sandy most (afaik) can reach 4.8 (at least) but difficult are getting pass 5.2ghz (with 8threads) at under 1.5xx, so try to get those 2 procs to 5.2++ i'll retain the least vcore on the 5.2 mark.

[[-erick-]]

Lowest multi is 12.. base clock hunting.. hihi

nice then loosen those mem timings (and push 1.65 (or max on your mems)) if 88824 then set to 99924 so you might reach 230++ that would be an awesome board.

@EarlZ: can you find the max base clock for your sandy, with DCW Ways (asus sabertooth) i have reached 107

[BackBeat]

Haha kataw-anan.. nalingaw ko.. 12 @210, no boot-up. Pumped volt to 1.2.. no booty.. hehe bump more, no no.. haha wa-ko-tabot-ako-buhat. Next time, kanang naa sa condition.. hehe