boss, piso2x unit ni? or kung dili, grabe pud kadaghan anang manuwaay oi nga way pawong2x from 10am to 11pm. kalas man kau na sa kuryente. akoa pud gamit sa balay, 24/7 ang gamit nko mga generic nga power supply. kung piso2x ni, overheating gyud tingali ang cause ana labi na ug kuwang sa ventilation.
try to get a branded psu tingali or add a ventilation like fan nya pagawas lang hangin pra mogawas ang init.
E.disable LNG sa ang deepfreeze bai at least bah ma log ang highest temp then try pd gamit lain na psu bcin psu LNG ni na prob.
possible problems:
*Videocard overheat issue (kusog mo inig ang GPU chipset sa vc).
*PCIe Slot For Vcard issue (ang mobo naay defect kusog mo inig ug vc).
*Procie Overheat issue (basin na overclocked).
*PSU (try go for higher wattage if makaya ba sa budget maski midrange lang sa PSU palita).
*Cooling System (add more case fans basin kulang sa ventilation).
kumusta naman brod? na fixed na nimo.. ang 3 unit nimo
updated daw!!
I assembled mga 26 na ka units na piso piso, and I have encountered some problems almost like this......... the most common reasons gyud na mo shutdown or sometimes mo hang-up ang pc kay "OVERHEATING" gyud just try the "trial and error" way of isolating the source of the problem....... In my own opinion dili siguro ang PSU maoy culprit ani..... It might be your RAM or your motherboard...... before I used to assemble my piso piso with unknown brand parts and the result I encountered problems like this..... no I switched to a bit ilado gamay pero dili kaayo mahal na part which is ASUS for the mobo & kingston for the RAM and kalooy sa God.... na minimize ang mga problema............ BTW ako mga units diri kay mag start ug on from 9 am or 10 am dayon dayon na 3 or 5 sa kaadlawon with occassional off of course...............
Murag PSU problem jud ni imo boss.... Suwayi nalang sa ang isa ana ug medyo taas2x gamay ug rating sa previous nimo para mahibaw-an nimo if psu ba jud...
Diritso jud siya off bro,I mean wala nay mga warning2x nga sign nga nakaencounter ug critical errors...
![]()
bro naa sad posibility sa psu... pero naka try nako ana nga problem.. suwayi lang kono ug check iyang processor bro basin dry or nawala na ang iyang thermal paste kai basin wala na magka atouch ang processor ug ang iyang cpu fan ug ang heatsink.. mao na mo init ang processor so ang tendency mo shutdown jud ang system...
Similar Threads |
|