White Gold Racing Circuit
Saturday, April 16, 2011
Technical and Speed Tech Races
Joining Fee: PHP20.00
TECHNICAL CATEGORY RACE
Registration: PHP60.00
Re-Entry: PHP20.00
Race Start: 4:30 P.M.
Technical Race Rules:
1. OPENED/UNOPENED Tamiya motors only.
2. Open AA rechargeable batteries.
3.Maximum of 4 rollers.
4. 8teeth pinion gear
5. 8teeth propeller shaft.
6. 2 rear pin brakes (No banda brake)
7. No FRP as reinforcing
8. Open rollers with/without o-rings, max (19mm)
9. No changing of batteries till the end of the race
SPEED TECH RACE
Registration Fee: PHP60.00
Race Start: 2:00P.M.
1. Only Tamiya unopened motors are accepted
2 700 mah batteries only, can be replace every heat
3. Maximum of 6 rollers with o-rings
4. Only 2 rear pin brakes.
5. No front brakes.
6. No screws to be used as brakes.
7. 8 teeth pinion gear.
8. 8T propeller shaft
9. All Tamiya counter and spar gears only.
10. No restriction of set up.(modified frp, weights/dampers etc.)
White Gold Racing Circuit
Sunday, April 10, 2011
Speed Race
Joining Fee: PHP20.00
Registration: PHP50.00
Re-entry: PHP20.00
Cut-off Time for re-entry: 6:00P.M.
Testing Time: 10:00A.M. t0 4:00P.M.
HIGH SPEED RACE RULES:
Category 1 : 3 Wheels Only
Category 2 : 4 Wheels Only
Category 3 : PRO (MS Pro and Evo)
General Rules:
The race will be in 3 separate categories, namely; 3 wheels, 4 wheels and PRO (MS Pro and Evo) race.
The race will be time attack race.
The top 8 or 4 or 2 lowest/best time will compete to qualify for the final race.
(20 and below participants only best 2 will qualify)
( 21 to 40 participants only best 4 will qualify)
(41 and above participants only best 8 will qualify)
Single elimination race for the qualifiers.
Only 1 will be proclaimed as winner/champion.
Re-entry is allowed.
Cut-off time for re-entry will be announce before the race start.
The final race will be a 6 lap race.
Regulations:
1. Any motor accepted (Open motor, rewind or stock accepted))
2. Any type of chassis are allowed (no restriction on chassis)
3. Only 700MaH battery is accepted (can change every heat)
4. Maximum of 8 rollers (with or without o-ring)
5. With or without brakes accepted
6. Any pinion accepted (direct or with counter gear are accepted)
7. No restriction of set up.(modified frp, weights/dampers etc.)