Cebu PCTech Association

[benson]

@j.alob: bro, didto nami ni joseph sa bradford, nag resita nami ngadto ug palitonon.

current setup ngadto kay wireless router---(wired)--->wap
then ang sa library nila nga balhinan sa computer kay no connection pa. 6 computers ang e transfer. nag resita nami ngadto wireless router, 8 ports switch hub, 30 meters cat5e utp cable, 15 pcs rj45.

ako problema is lisud to no avail kun mag wire ta from wireless router(main) to wireless router(new) kay concrete ang sa may library, layo & lain tan-awon if naa wire makita. so, among idea is to connect from wap wirelessly to the wireless router(new) or from wireless router(main) wirelessly to wireless router(new). i think possible ning duha, right? ako lang gigamit ang akong nahibal-an katong nag setup ko ug wireless repeater using mac address.

idea ninyo guys? open to suggestion.. lets discuss it here mentras wala pa nakapalit ug materials.

@isda_sa_bato: bro, ok pud ang imong gibuhat da, artistic gyud ka da.

@benicio: ben, naa pa t-shirt diha? ngayo mi joseph be. naka bayad naman mi ngadto ni marcial.

[ISDA_SA_BATO]

@j.alob: bro, didto nami ni joseph sa bradford, nag resita nami ngadto ug paliton.

current setup ngadto kay wireless router-->wap
then ang sa library nila nga balhinan sa computer kay no connection pa. 6 computers ang e transfer. nag resita nami ngadto wireless router, 8 ports switch hub, 30 meters cat5e utp cable, 15 pcs rj45.

ako problema is lisud to no avail kun mag wire ta from wireless router(main) to wireless router(new). so, among idea is to connect from wap wirelessly to the wireless router(new) or from wireless router(main) to wireless router(new). i think possible ning duha. ako lang gigamit ang akong nahibal-an katong nag setup ko ug wireless repeater using mac address.

idea ninyo guys? open to suggestion.. lets discuss it here mentras wala pa nakapalit ug materials.

@benicio: ben, naa pa t-shirt diha? ngayo mi joseph be. naka bayad naman mi ngadto ni marcial.

nice one bro,.so meaning,. kadtong new nga router mokuha rag signal sa old router(main router) aron maka access sila sa resources sa mga host connected sa main through wireless connection,.so far sa akong nahibaw-an ana bro,. ang subnet sa new router should be set the same sa subnet sa old(main) aron magkakitaay sila and it should be not DHCP ,.,.i think mao na,.any suggestion pa,.

[togoys]

oi asa nman c sting boy el presidente marcialito capin jr.. ? bro napa ka dha ayyy...na busy cguro sa iyang new job..wahehehehe...peace...!!!kita kits puhon mga bro.. .

[butitoy]

time ngadto sa Bradford?

[benson]

@butitoy: 9:00am to 2:00pm followed by meeting supposed to be.
pero ang meeting wala pa ma confirm kay wala paman ma contact si boss marcial.

[j.alob]

nice one ben, thanks

btw sa ani nga situation. calling atong mga expert sa network2x diha heheh suggest and hatag mo unsa pay possible nga atong mabuhat ani. or this setup nalang atong gamiton...

txtc tawn ug kumustaha atong presidente hehehe.

@j.alob: bro, didto nami ni joseph sa bradford, nag resita nami ngadto ug palitonon.

current setup ngadto kay wireless router---(wired)--->wap
then ang sa library nila nga balhinan sa computer kay no connection pa. 6 computers ang e transfer. nag resita nami ngadto wireless router, 8 ports switch hub, 30 meters cat5e utp cable, 15 pcs rj45.

ako problema is lisud to no avail kun mag wire ta from wireless router(main) to wireless router(new) kay concrete ang sa may library, layo & lain tan-awon if naa wire makita. so, among idea is to connect from wap wirelessly to the wireless router(new) or from wireless router(main) wirelessly to wireless router(new). i think possible ning duha, right? ako lang gigamit ang akong nahibal-an katong nag setup ko ug wireless repeater using mac address.

idea ninyo guys? open to suggestion.. lets discuss it here mentras wala pa nakapalit ug materials.

[benson]

good morning guys.

[fineupgrades]

ako problema is lisud to no avail kun mag wire ta from wireless router(main) to wireless router(new) kay concrete ang sa may library, layo & lain tan-awon if naa wire makita. so, among idea is to connect from wap wirelessly to the wireless router(new) or from wireless router(main) wirelessly to wireless router(new).

Sir, try this product of ours:

https://www.istorya.net/forums/comput...-solution.html

[ISDA_SA_BATO]

Sir, try this product of ours:

https://www.istorya.net/forums/comput...-solution.html (Powerline 200M Networking Solution)

wow,.karawa!,.nindota gud ana,.karon pa ko kita ani dah,.no need for any cabling set-up,.nice one

[benson]

nice sir ryan, only obstacle is if the electrical wirings are not on the same connection, right? (that is what i understand on your diagram.)

sad to say, i heard they are not on the same lines