What's your Post Processing workflow?

[norwindetalla]

as to my PP for sharpening just like that of Flickr's effect nga sharp ang image... i have 2

1st Technique

1. Open image > CTRL + J to create a copy the background layer
2. Go to Filter > Other > High Pass > adjust radius to (range from 2.0px - 5.0px) and make sure kanang dili kaayo grabeh.. kamo na mag igo igo sa values as long as ma emphasize ang mga edges
3. Select the 2nd layer then change Blend Mode from Normal to either:
- Soft Light
- Hard Light
- Vivid Light

2nd Technique
1. Open RGB image > CTRL+J (duplicate layer)
2. On second layer > click on Image > Mode > select Lab Color
3. Click on don't flatten
4. Go to Layers tab > switch to Channels tab
5. Select Lightness
6. Go to Filter > Sharpen > unsharp Mask > set amount to 50% (or depende unsa ka strong ang sharpness) > hit OK
7. Go back to Channels tab > click on Lab layer
8. Click on Layers tab > select the topmost image (layer 1)
9. Click on Image > Mode > RGB Color
10. Flatten Image

Viola..
Hope that helps.

i'm verge - ain't no photographer but got myself a nifty d5k.

Thanks for sharing bai... BTW nindot kau imo shots sa imo site...

[bilyotoy1]

Thanks for sharing bai... BTW nindot kau imo shots sa imo site...

salamat kaayo bossing. happy to hear from a pro... post post lang ko diri aron pud ko makat-on ug maka uban uban ug grupo. kay lulinghayaw ko tawn ani kung ako ra isa magshoot shoot woie..

[norwindetalla]

salamat kaayo bossing. happy to hear from a pro... post post lang ko diri aron pud ko makat-on ug maka uban uban ug grupo. kay lulinghayaw ko tawn ani kung ako ra isa magshoot shoot woie..

PRO man kaau ka... pa.apila nya ta ug shoot nimo beh...hehe

[ampdeck]

Share lang ko sa ako workflow ha. Its quite basic though but maybe makatabang sad sa uban.

1. I always shoot in RAW. I am not a perfect photographer. Using RAW, I can easily fine tune my photo from exposure to white balance without loosing image quality.

2. I use AdobeRGB color space instead of sRGB (you have to set the color space in your Camera as well as in Photoshop). Based on facts (daw), it has bigger data space than sRGB therefore it stores more data and color information, which you can use later in post processing to give vivid colors and highly detailed images.

3. I use ACR (Adobe Camera Raw, im using version 5.6 as of now) for post processing 80% of the time (including sharpening, white balance, skin smoothing, color adjustments, etc). Only 20% in photoshop (resizing, saving to JPG, and other adjustments). This is because, post processing in RAW will give you better results than post processing in compressed JPG. It will give much detailed and clean output, less noise, vivid colors and minimal artifacts.

Using this workflow, you can see the result in my website .:: Alex Ramil Aguel ::.

I hope this help a little.

thanks for sharing idol

[bilyotoy1]

PRO man kaau ka... pa.apila nya ta ug shoot nimo beh...hehe

pro ba bai.. super beginner lang kaayo jud ko ani. bag uhay pako ani. mao apil apil ko forums aron maka kuyog kuyog ko shots.. heheh

puhon. we can schedule if available ka.. if naa ka shoots.. kuyog lang ko..

[tingwaltz]

naa lang ko i-share..
sa mga hilig mugamit ug lightroom..
check this out...
AdobeTV | Learn Lightroom 2.0

[norwindetalla]

isaka nato gamay...

[norwindetalla]

up up up para makit-an...

[pierced]

nndut ni nga forum da
thanks kau ani TS

[P-Chan]

removal of dust/blemish -> curves[-> enhancement(optional)->sharpening (optional)]