Taking A Shot At Water Cooling

[glide 1]

d'you have spare na san ace 25mm?

Sorry poldz tulo ra ni just enough for the rad. wish i had more

erick - yup cge post nya diri, ganahan ko mo tanaw sa imong additions. Nag ilis na ba kag pumps? unsay model imo na kuha?

P0w3rM0v3 - sa US. suway2x lang ni, so far murag ok. Kita ko sa imong rad ila comcam ganina....

[blizzaga4]

Got some stuff in today...

Swiftech/Laing Pump


opened, checked, and cleaned with distilled water

choia centrifugal pump oi....

[jojobanana92400]

@Glide, This week to maabot imung order's.

[[-erick-]]

ang naa sa ako cart kay

Danger Den/Laing DDC 3.25 -12V 18 Watt Version Products Model: DD-DDC325 [DD-DDC325] : Performance-PCs.com, ... sleeve it and they will come

Magicool Extreme Slim Profile 3X140mm Radiator - Black Products Model: MC-RAD420 [MC-RAD420] : Performance-PCs.com, ... sleeve it and they will come

ang uban libog pa ko unsa akoa kuhaon.

[glide 1]

@Glide, This week to maabot imung order's.

Jo - binuang ra oi nindot na imo ig human.

erick - nice items. Dual loop man ka diba? You need to get an aftermarket top or res/top for those pumps to perform at their best. EK, XSPC has some good ones.

If you need fans - I've heard these are good 140mm fans
SANYO DENKI Web CATALOGE

[[-erick-]]

atm i have
1.) (asus commando)swiftech microres > 655 > 3x120mm rad (swiftech) > cpu > nb > mosfet > sb
2.) (asus rampage 2 extreme) drive bay res > 655 > 2x120mm rad (swiftech) > alphacool

plan ko for the server (asus commando) 1st loop intact tapos pagawa ako DIY na hdd cooler. tapos ang loop duoon will be ek400 res > 655 > 3x120mm (swap ko sa 1st loop) > tapos 2xDIY hdd cooler (10hdds per block)>

sa new system will be (2xDDC 3.25) (r3e) EK-FB RE3 - Asus Rampage III Extreme - Nickel/Acetal Products Model: EK-FB-RE3-NK-AC [EK-FB-RE3-NK-AC] : Performance-PCs.com, ... sleeve it and they will come (kung mabenta ko na itong r2e ko) > mosfets

den still planning ano vc's for the second loop.

[glide 1]

erick, very nice. what top/ or res/top combo do you plan to use for those DDC's? Look in to those as the performance increase of those pumps with the tops is worth it. Kanang 655's nimo naa ba aftermarket tops karon or stock lang?

That EK block will look killer on the R3E

You will need some rad power for what you plan to cool. At least a triple on the cpu alone, quad on the vc's (kung xfire), and at least a double on the nb/sb/mosfets. Ask Andz or Jojobanana as you run the same high end systems as them. Good luck and post some update pics....

[[-erick-]]

not sure yet;

need to plan it out pa sa case ko abs canyon 695 aka lian li pc-x2000

either sli 295 or 295 + 280 (already wc) physx (those blocks are damn expensive 180-200$) lol

[glide 1]

Have this system going - NO LEAKS!!

here's a quick test

[simoko]

^^^ kanindot oi...34c @ 4.6GHz

mao ni nga system imong butangan sa SSD? hehehehe...