sound setup suggestion

[rajulnovs]

---

naa ko 2 ka double coil 400 watts speakers and 2 ka single coil 500 watts speaker all 12", i have 1 v12 amp 4 chanel 4000 watts.2 ohm stable..pwede bani ma connect tanan speakers in one amp.. naa 1 pair of 6x9 500 watts and 1 pair of midrange and tweets...pwede bani ma connect tanan speakers in one amp

[JeffCee]

https://www.istorya.net/forums/automo...io-system.html

makatabang na nga thread..

[chrisgon]

4 kabuok imuha sub sir? (2 ka 400 watts double coil and 2 ka single coil 500 watts)

im not that much well educated when it comes to soud setup sir, pero i think mas maayu if you'll use your amp only for the speakers and buy another one or the subs... i think dili na maka daug imuha amp sa tibuok system nimo especially daghan kaayu ka ug sub g gamit... dako pod n ug requirement imuha system if imuha jud n gamiton (lets say duha ka sub lang and ang mga speakers nimo) so in short u have to consider ur electricals na pod ani like imuha alternator if kaya bah ang system nimo na iyaha kargahun.


lets wait for others na mupost... especially katu mga sweto kaayu ani.



.

[K+SOLID]

naa ko 2 ka double coil 400 watts speakers and 2 ka single coil 500 watts speaker all 12", i have 1 v12 amp 4 chanel 4000 watts.2 ohm stable..pwede bani ma connect tanan speakers in one amp.. naa 1 pair of 6x9 500 watts and 1 pair of midrange and tweets...pwede bani ma connect tanan speakers in one amp

>> hello good day..

kindly check the impedance on your subs both
for the double voice coil and single voice coil,
para we can further evaluate whether your
V12 amp can drive them.

2nd, i would suggest to get another amp which will
be dedicated for your mid hi (6x9's or separates)..

3rd, I would suggest to make your set up simple.
example:

1 pair of 6x9's + subwoofer(2 pcs lang)
or
1 pair of separates + subwoofer (2 pcs lang)

different brands / kinds of speakers have different
sound characteristics, blending 2 different brands
to produce 1 sound, will be a challenge... to make
things easier, a set up with utmost simplicity will
be able to carry its function more
efficiently and effectively...

[rajulnovs]

thanks mga bro.. kalimot ko sa impedance sa single coil.. pero ang double coil is 4 ohms 400watts

[K+SOLID]

thanks mga bro.. kalimot ko sa impedance sa single coil.. pero ang double coil is 4 ohms 400watts

good day...

as for your dual voice coil nga 4 ohms, i guess murag dili efficient ang system nimo kung gamiton ang duha. t it would be better if 1 dvc lng para ma optimize nimo ang amp nimo.
since 1 dvc 4 ohms wired parallel will produce 2 ohms man...

example:

2 dvc 4 ohms (series/parallel) = 4 ohms
2 dvc 4 ohms (parallel/parallel) = 1 ohm

for further info refer to this link--->

JL Audio - Car Audio Systems

[rajulnovs]

okok thanks sa info... pick up man gud ako butangan sa loyo.. wat if ill go for 4 Single VoiceCoil at 8ohms 500watts..kaya ba sa v12 4 channel amp 4000watts.. or any suggestion kung pila ka speakers pwede sa amp...thanks mga boss

[rajulnovs]

up. .

[K+SOLID]

boss,
try to scan info from this link,
hope this could help you
for your car audio projekt.

-->JL Audio - Car Audio Systems

[rajulnovs]

thanks bossing...