How to fix a blue screen? Help!!

[Rhine28]

---

so far sa ako nasugatan...problem na sa RAM, HDD, and cable connections

[jerm_ironz]

try lang, Re-Seat ang Memory, powercord, IDE/SATA cable...Video card..basin naay Loag

[motchkatt]

reformat and reinstall OS. if XP gamit, be sure tangtang sa uban mga parts like external lan/modem, printer ky muangal sya (magBlue screen) if naa parts nga nkataud during OS installation..

if napa gihapon after all that..., aw virus or memory cgro...

[butitoy]

how to fix it? use Linux.

not entirely helpful.

linux can't run a failing hardware component.

[noetech]

kasagaran ana windows problem man. cge naman ko kasulay ana...ma fix ra man pod...kopyaha lang ang iyaha error code..try to google it..

[jerm_ironz]

try to re-seat the cables inside the PC bro.......and also the card (Video Card, RAM)...

[butitoy]

if its BSOD.

step 1: remember the last time ur pc is running good.
yesterday.4hrs ago.2hrs ago...after u install something.

step2. backward engineering. ( if u install new hardware or software : drivers. etc )
remove any hardware recently installed ( when ur pc is still in running state )
remove any recently installed apps. < start < F8 < safemode < system restore

if BSOD is SOFTWARE caused, it used fixed it.unless its a crashed partition.

run again..NOT?


after restore or when restore fails. repair windows..ready ur pen and paper. jot down any screen dialog thats unsual during the thousand installation u've done.

start < booting from Cd
< to setsup blah.blah. press enter < ENTER.of course!
< EULA<F8
< searching for previously installed windows blah.blah [ this is the part u'll know if the partition is dead or its just needs some fixing ]
< press R to repair or esc to blah.blah.blah. < press R


if its not the case..just continue the installation.its a chance to know if ur RAM is working GOOD

FAILED?

^^ step3. ocular inspection. use ur Senses,

that includes common sense. do not lick ur pc to taste it. LoLz!

open ur pc casing. turn it on.

* is it HOT? overheating..

* does it smells like burning? burned parts..
* does it stinks? gkalibangan ni mickeymouse

* is it screaming?ticking? dead memory.failing hdd..etc.

* luk for bulging capacitor.defaced | removed parts.burned parts.
* luk for anything that shud not be there.
( sometime b4. my client shouted BSOD and i fixed it.caused by all metal screw driver his offspring accidentally put in vc. dead mx400. )


step4. turn off PC. CLEAN it! ( its a chance good enuf not to pass ) and inspect components thoroughly

remove vc.memory.hdd.heatsink.psu

leaving only the mobo and proc.

brush off dust dirt and any deposited material on the MOBO. use blower and clean brush.

use kerosene + MC to remove any stains..paint thinner | Lacquer thinner is the better choice

clean RAM | VC contact points with the oldie GRAY|WHITE rubber eraser.if its in the state of corrosion. use metal polish + toothbrush + kerosene ( u know the drill )


open ur PSU if its not in warranty anymore.
same drill.check

[franz_leo]

asa cya dapit mag blue screen bro? unsay last nmo g install?

Try ad2 sa safe mode bro nya e uninstall ang last nmo g install ka2 wla pa cya mag blue screen..

[BrOKensHardz]

pwede naa sa pc ang problem pwede pud naa sa monitor ug problema kung sa monitor ukabonon na nya naay lisoon o ilisan pyesa ana.... kung naa kay laing unit try daw ug ilis sa ilang monitor