SMART WI-FI(PATCH or CROSSOVER cable?)

[THINKER100X]

Sir somebody ask for my assistance to connect two computers for his smart wi-fi connection. I know how to connect it but my problem is im not sure what type of cable is used by smart wi-fi...I know there is somebody here that has a connection of smart wi-fi, I hope i could ask help to all of you out there that knows about the connection of smart wi-fi. My important question is i just want to know what type of cable connection is using by smart wi-fi, is it Patch cable or Crossover?... and if there are other suggestions that you can give me for installing it I would appreciate it.... . Thanks....

[Wayth Vader]

if ur computer can do autosense then pwede bisag asa... ICS

[darkwing]

hmmm maypa mag router nalang hehe

[AMD_infinium05]

your HOST computer must have two Ethernet adapters. One goes for the Smart Wifi and the other goes to the other pc.

Use Crossover cable (568A - 568B) in connecting your second pc to your Host pc. << this is be connected to your HOst's second ethernet adapter.

Leave the lan cable supplied by smart for your connection. < this will be connected to your Host's FIRST ethernet adapter..

Run Network Setup:
start > control panel > network connections > under Network Task pane: click "Set up a home or small office network"

or:

start > run > type in " netsetup" w/o the quotes... follow the instructions on that dialog box and you'll be fine.

[Tradah]

patch bro or straitght thru cable

[THINKER100X]

I ddnt have here a crossover cable..is it possible to connect them using a patch cable? Sir can u give me the guide for sharing my internet connection to my other pc? I ddnt know how to share a network connection frm one computer to another computer...i hope u can give me a guide on it....anyway ill just want to use a patch cable for sharing my connections...i know its maybe not possible for the 2 computers but how about if i use a switch? I mean the second lan card on my host pc will go first to a switch and then i will use other patch cable to my client pc that is also going to the switch.....
I hope it is possible...thanks!!!!

[Apocalypse]

I ddnt have here a crossover cable..is it possible to connect them using a patch cable? Sir can u give me the guide for sharing my internet connection to my other pc? I ddnt know how to share a network connection frm one computer to another computer...i hope u can give me a guide on it....anyway ill just want to use a patch cable for sharing my connections...i know its maybe not possible for the 2 computers but how about if i use a switch? I mean the second lan card on my host pc will go first to a switch and then i will use other patch cable to my client pc that is also going to the switch.....
I hope it is possible...thanks!!!!

morag dli mn cguro na pde bro mag nid gyod ka og router

[THINKER100X]

Thanks for a reply ms., beautiful girl...anyway ill just research bout 1 oclock am till 3 am and i found the solution.... no need to put router...what i did is put two lan card in my host pc the first is the connection frm smart and the second is going to the hub....thats it....i allow ICS on my 2nd NIC frm my host pc and it give me the gateway as 192.168.0.1.....i connect my 3 client pc to my hub and give the gateway frm my host computer and bingo i have now four pc running smart bro....the problem is when i shutdown my host pc my connection on client pc was lost....ANYBODY HERE WHO KNOWS ABOUT WAKE ON LAN? lthanks....

[monrose29]

experience is the best teacher.. ....