Epson C45 "Service Required" Error

**godCode** · 05-15-2006, 02:29 PM

mga bro, kuybaw mo kung unsa ni nga error? nangita ko sa internet pero wla ko kuybaw kung unsa gyud ni. ning kalit raman ni. i just replaced the black ink with a non-original kay hurot naman. ning print ko ug 1 page, ok pa. then nag print ko ug balik then ning gawas lang ni kalit. ahak dili nako ka print!

**dexterdal** · 05-15-2006, 02:55 PM

bai e try to uninstall imong driver sa printer then restart then install balik

**stradnus** · 05-15-2006, 03:14 PM

I experienced this kind of errors...
Replace the Waste Ink Pads and then reset the Internal Waste Ink Pad Counter of your printer (I tried this many times) :mrgreen:
Follow this link www.ssclg.com/epsone.shtml or you can directly download the SSC Service Utility (for resetting your ink pad counter) www.ssclg.com/download/sscserve.exe

**godCode** · 05-15-2006, 11:16 PM

bai stradnus, unsaon man pag replace sa waste ink pads? mahadlok man gud ko mang hilabot sa printer kay dili man gud akoa. naka download nako ug sscservice.exe and ill install it 2morror...

**stradnus** · 05-16-2006, 06:20 AM

iopen ang house casing sa imong printer den ilocate ang waste ink pad sa likod sa machine (waste ink pads looks like hard foam)..., kung mahadlok gyud ka mo-open.., aw pwede ra nimo ireset ang ink pad counter pero kujaw na magbaha ug waste ink inside your printer... :mrgreen:

**godCode** · 05-16-2006, 07:10 PM

ok ill try to remove it. thanks for the help.

**godCode** · 05-16-2006, 09:01 PM

bay ako gi sulayan ang reset using the ssclg software, pero dili lagi mahimo gihapon? and dili pa gyud nako ma ibot balik ang black ink cartridge kay ang both buttons sa printer kay mag alternately blink and dili pwede ma pislit ang katong button para pang refill ug ink.

**stradnus** · 05-17-2006, 06:16 AM

kinahanglan kung mag reset ka, naka conek ang printer sa pc ug naka on ang printer..,

**godCode** · 05-17-2006, 09:34 AM

dili lagi bay. naka on man ang printer pero dili niya ma reset. mura hugaw ra gyud siguro ang waste ink pads...

**dexfranco** · 05-17-2006, 11:01 PM

The waste ink counter is not directly connected to any sensor in the C45 it just counts how many drops na hulog sa imong waste ink pad sa ilalom sa printer it will be more or less depending sa evaporation sa imong pad so better to just reset the counter. If the SSC utility cannot reset it you will have to do the resetting manually using the buttons on top of the printer, its a different combination for each model of printer by epson so try googling

for it but i would recommend the SSC utility since much easier to reset the eeprom of the protection counter. :mrgreen:

Thread: Epson C45 "Service Required" Error

Thread Tools

Search Thread