Page 12 of 105 FirstFirst ... 2910111213141522 ... LastLast
Results 111 to 120 of 1044
  1. #111

    Default .:: Overclocking 101 ::.


    @mE_bytes thanks for the info

    and

    @CrasHBURN, I think I'll give a visit to your shop one of these days. Sige man diay ko ug agi-agi diha

  2. #112

    Default .:: Overclocking 101 ::.

    @firebasefury: why stop at 2.0ghz? hehehe! anyway, use the highest values for your ram timings (this will give more room for overclocking your processor, push your ram after you've found your processor's max overclock).

    suggested settings:
    cas latency: 3t
    ras to cas delay: 3t
    precharge: 3t
    active pre-charge:8t

    as for your psu, kung generic na, never mind... go to CrasHBURN's shop (Insotec) and do yourself a favor - get a better psu and more advice from him. c",) c",)

    good luck!

  3. #113

    Default .:: Overclocking 101 ::.

    Ultimate Athlon XP Overclocking...

    http://www.gurureview.co.uk/index.ph...1&limitstart=0

    interesting... mobile athlon xp on a desktop

  4. #114

    Default .:: Overclocking 101 ::.

    firebasefury: i think you need to change your motherboard... P4PE = i845 chipset... which has a max of 533MHz FSB... above that will give you 80% unstable system. get a i865PE motherboard instead. again, PM lang if kinhangan ka... hehehehe...

    MSI 865PE Neo Motherboard is cool.. epox has good one also...

  5. #115

    Default .:: Overclocking 101 ::.

    @blade4638

    I just want to have it OCed until the max limit without buying anything coz as I've said I will be building my new rig soon and i'll give this rig to my sister. by the way I'll try to apply what you told me today.

    @CrasHBURN

    My plan for my next rig is an i875 chipset with 1gig of mem and a 3.2 proc. I already have the budget for the Casing and the PSU but don't have time yet to canvass for the other parts. Busy man gud kaayo ko sa office wa pay time pag suroy2x

  6. #116

    Default .:: Overclocking 101 ::.

    Quote Originally Posted by blade4638
    @firebasefury: why stop at 2.0ghz? hehehe! anyway, use the highest values for your ram timings (this will give more room for overclocking your processor, push your ram after you've found your processor's max overclock).

    suggested settings:
    cas latency: 3t
    ras to cas delay: 3t
    precharge: 3t
    active pre-charge:8t

    as for your psu, kung generic na, never mind... go to CrasHBURN's shop (Insotec) and do yourself a favor - get a better psu and more advice from him. c",) c",)

    yo! I've tried the above settings already but its still not a success everytime windows starts it automatically reboots.

    good luck!

  7. #117

    Default .:: Overclocking 101 ::.

    @firebasefury: tell us your 3.3v, 5.0v, 12.0v, and Vcore readings (use motherboard monitor) when your system is not overclocked. a 1.7ghz p4 "a" proc will do 2.1ghz with stock cooling (tried this with 5 different p4 "a" procs in the past). your psu may be the cause. observe the readings as you increase your fsb little by litte (e.g. 5mhz at a time) from its default value. if the readings fall by 5% - 10% or more before you reach ~2.0ghz, then either be happy with the last fsb value before your pc automatically reboots, or get a new psu.

    however, if the voltages are within 5% of its expected value as you near your 2.0ghz target, try increasing your ram voltage _one_step_at_a_time_ and continue testing. also note your voltage readings after you increase the ram voltage.

    as i said, kung generic imong psu, never mind... don't expect to fly from paris to the u.s. in 4 hours on a fokker twin-turboprop plane. joke lang bro, hehehe! c",) c",) nowadays, there are just some things you can't do anymore using a generic 300-watt psu.

  8. #118

    Default .:: Overclocking 101 ::.

    OK Blade I'll try to do that. I'll just post my result after. Thanks for your help bro

  9. #119

    Default .:: Overclocking 101 ::.

    @firebasefury: no problem bro c",) just keep up posted.

  10. #120

    Default .:: Overclocking 101 ::.

    Di na ko anang OC. Hahahah! Malason ko. Gudthing i had my VC replaced.

  11.    Advertisement

Page 12 of 105 FirstFirst ... 2910111213141522 ... LastLast

Similar Threads

 
  1. Guitar 101
    By Carlo Borromeo in forum Music & Radio
    Replies: 74
    Last Post: 11-25-2014, 09:09 PM
  2. Internet Cafe Biz 101: Issues and Inquiries~
    By murtaloco in forum Business, Finance & Economics Discussions
    Replies: 831
    Last Post: 06-11-2012, 03:02 PM
  3. Replies: 370
    Last Post: 09-07-2008, 11:57 PM
  4. Replies: 285
    Last Post: 10-25-2007, 09:59 PM
  5. SCAM 101 : never give out blank checks
    By SPRINGFIELD_XD_40 in forum Politics & Current Events
    Replies: 14
    Last Post: 06-06-2006, 12:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top