Router and Hub Switch Connection

[bushman]

---

Pasuyo sa lahat, right now gumamit ako ng router D-link DI-604 at Intex 16port 10/100mbpps N-Way hub switch, napagana ko na yung 6 na pc pero yung 4 ayaw, hindi maka connect sa internet. In check ko na land cable point to point pero ayaw talaga.

ano ang possibleng problem?

patulong pls

bushman

[SmaRkieS]

Check DHCP Pool Size, and increase it.

For a simple LAN, stick with 192.168.0.100, a subnet mask of 255.255.255.0 and a pool size of 50. This will allow up to 50 machines to be set up on your network without having to change anything.

[L1Technician]

Pasuyo sa lahat, right now gumamit ako ng router D-link DI-604 at Intex 16port 10/100mbpps N-Way hub switch, napagana ko na yung 6 na pc pero yung 4 ayaw, hindi maka connect sa internet. In check ko na land cable point to point pero ayaw talaga.

ano ang possibleng problem?

patulong pls

bushman

* Make sure the 4 PC's are set to Obtain an IP address automatically
- If its already Obtain but can't get an IP address try (disable and enable the LAN connection, restart the computer)
- If still can't get an IP address try use Static and then ping the router IP address you should be getting like this (Sent=4, Received=4, Lost=0)


* Check the IP address of the 4 PC's, it should be in the same range with the router IP address
- If it has a valid IP address try ping the router IP address you should be getting like this (Sent=4, Received=4, Lost=0)
- If you have the same result try ping 74.125.95.99 you should be getting like this (Sent=4, Received=4, Lost=0)
- If still no Internet on the PC assign a static IP address (Preferred DNS: 4.2.2.2, Alternate DNS: 4.2.2.3)
- Then check the Internet

[benicio]

tagalog pala ka?
dhcp settings lang yan. anong gateway nyan?

[bbriones]

probably there is limited users on you router, try adding more users

[je0frey]

check your DHCP settings on your router your pool size should be enough for the max pc's you will be using. Then on your pc check its ip address, its ip address, SM, gateway and DNS should be same as what you have configure on your DHCP server..