pwede ni???

[presidente]

---

butangi na ug router .. mao ra na kulang... check kung imo modem enable ba ang router.. paliti nalng na or WRT45g or variant.. mao na na...

[rlcrl]

post your exact modem model number...

reconfigure your modem to routing mode kay ang default ana sa pldt is naka bridge.

[junielromares]

ang modem kai zyxel p-600

dili man japon ma connect sir

[junielromares]

dili man ko ka sulod sa modem mga bro... ang model kai

zyxel p-600

unsaon pag sulod sa modem,,,, 192.168.1.1... dili man cya mo display

[junielromares]

pls help mga master...

[mazkot]

p600 na gamay, modem da na sya.

[giancarlo]

pwde kaau,,,,,,,..............

[hizuka007]

zyxel p-600? aw kailangan nag router bai... mao man pud na akoa. wala nay router builtin..

[je0frey]

To access modem you must set your ip add first to static on range of 192.168.1.2-254, cause right now your receiving global ip from pldt. After setting ip add for example ip=192.168.1.2 SM=255.255.255.0, you should be able to ping the 192.168.1.1, then access the modem through web browser. default password 1234
settings here:

ON WAN:
Mode=Routing
Encasulation= ENET ENCAP
Multiplex=LLC
VPI=0
VCI=100
IP=Obtain an IP Address Automatically

ON LAN:
DHCP =Server
Client IP Pool Starting Address=192.168.1.100 (its up to you where to start)
Size of Client IP Pool =30 (how many ips manage by your DHCP Server)
Primary DNS Server =(check first what DNS your using right now then use it here )
Secondary DNS Server (same goes for here)
Remote DHCP Server =N/A

TCP/IP
IP Address =192.168.1.1
IP Subnet Mask =255.255.255.0

ON NAT:
Select SUA only

[chill_angel25]

try ni bro! pldt modem ------ pc.
nya type sa browse 192.168.1.1