Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31

Thread: Thermal grease

  1. #21

    Default

    sa processor ni imong pasabot? of course, kay magdoble-doble ang layers preventing metal to metal contact. like i said earlier, the purpose of the thermal interface material is to fill in the gaps of the imperfections on both heatsink and integrated heat spreader of the processor and not act as a bridge between the two...again, only the imperfections between heatsink and processor.

  2. #22

    Default

    sa hsf contact sir, kanang original thermal pad nga binutang sa intel. okey lang ba clean cotton clothe akung gamiton for removing the thermal pad sa hsf contact? murag ni pilit na man gud to .thanks

  3. #23

    Default

    unsa diay ni nga processor nga gagamit man ug thermal pad?

  4. #24

    Default

    E5200, wa na man gud ko nipalit ug paste pag palit nako aning E5200 kay ingon ang taga pcx dire sa manila nga pwedi ra daw wala naa na daw thermal pad nga gi butang sa contact sa heatsink fan. murag 3 ra ka baglis ang gi butang nga thermal pad (or is it paste?) the guy in pcx calls it "thermal pad" man gud

  5. #25

    Default

    thermal paste na bro, hehehehe. ang thermal pad is lain pud na. ok nana gamiton uy, pero after several months, re-apply lang using third-party thermal paste. -- i recommend Tuniq TX-2 because its locally available and performs just as awesome as the other known performance TIMs.
    Last edited by poldopunk; 06-02-2009 at 10:51 PM.

  6. #26

    Default

    Tuniq TX-2 sad ko. Payts kaayo ang akong temps

  7. #27

    Default

    ah. sir, how do i remove the thermal paste nga gi butang sa hsf contact? ok lang nga i'll use soft clean cotton clothe?

  8. #28

    Default

    lint-free cloth is recommended but heck, tissue ra gani ako gamit. you can use an alcohol solution but make sure na kadtong tag-as ug concentration para evaporate jud tanan wala'y residue (tubig) mabilin, again...denatured alcohol rasad akong gamit, ala mcguyver style (kung unsa naa, mao rasad )
    Last edited by poldopunk; 06-04-2009 at 11:55 AM.

  9. #29

    Default

    bro.. sahay ba gahi lagi.. hmm tri ko ug tuniq nya.. and bro.. sahay ra ba ako ra ba e scrape ang kana bitaw murag nag pilit sa ako processor and heatsink..

    thanks sa recommendation.. try nako na after 1 month from now kay naka schedule tanan ako limpyo and ako mga other activities..

  10. #30

    Talking

    mga tol

    akong gi-try na thermal paste ky kanang nano thermal compound sa CD-R king. oki rba na?

Page 3 of 4 FirstFirst 1234 LastLast

Similar Threads

 
  1. Replies: 68
    Last Post: 08-16-2013, 03:03 PM
  2. Coolermaster Thermal grease?
    By yugi in forum Computer Hardware
    Replies: 11
    Last Post: 10-31-2008, 09:32 PM
  3. FS: zalman thermal grease
    By rey_apc in forum Computers & Accessories
    Replies: 4
    Last Post: 05-24-2008, 02:54 PM
  4. LF: thermal grease/paste
    By epoyking in forum Computer Hardware
    Replies: 9
    Last Post: 05-22-2008, 01:18 PM
  5. How To Correctly Apply Thermal Grease
    By fd in forum Computer Hardware
    Replies: 5
    Last Post: 01-24-2006, 06:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top