UTP Splitter DOESn't work..

[coolnezz]

---

(you said when you unplug PC1, then PC2 will work)

what about when u unplug PC2, does PC1 work?

[chabm_more]

you're using a router with this splitter right?
with both pc connected, what's the status of the lan connection? what about the ip, what are they(if they have one)?
coolnezz is also right, what about the other way around.. what happens?

[pa0pa0]

@coolnezz and @chabm_more - either way PC1 or PC2, does work. when plugged into one PC.. it does work..

@chabm_more - yes sir, im using router.. Ok, lets forget the router thing sir.. i tried it now also from IO slot, regardless of any IP coz i obtain it automatically.. still this doesnt work..

[coolnezz]

i don't think these things work on routers or switches. they're designed to plug from the wall jack to the PCs. for some reason, the wire pairs are getting mixed up. and these things don't work on Gigabit Ethernets either. pins 1,2,3,6 (orange & green pairs) are the only pins being used on 10/100 ethernet.
maybe you need to open it up and see which wires connect to which color pair.

[monrose29]

try daw og ukab mo work nah sya but i think sayop ang connection ana..

e compare aneh or e search sa google



tan awa ang pin out.. then e compare

[pa0pa0]

try daw og ukab mo work nah sya but i think sayop ang connection ana..

e compare aneh or e search sa google



tan awa ang pin out.. then e compare

thanks sir, il try that later.

Good morning, by the way.