zyxel Router Congiguration

[lemgianrea]

---

unsaon pag install sa wan connection through server para ma link naku ang uban nga computers i don't know how to configure it then ang lan cge ug limited connectivity...please help me...tnx...

[k.A.i]

unsa nga model imong zyxel bro?

[Tin_Tin]

i think you need a router for that.

[keekwaa]

192.168.1.1 user: admin password:1234 or 123456 then enjoy router/modem configuration...

[nerub]

it could be that your client machines are using APIPA to assign themselves ip address. to solve this, its either you define static ip addresses on your client PCs or use the DHCP server functionality of your router to assign dynamic ip addresses to your PCs.

havent used a zyxel router before but the setup should be the same as with all globe/pldt etc. routers. this is just a generic idea. some routers have diferent names for different features/menu. here it goes:

look for the page where it says setup/system management, look for an option where it says WAN connection type, set it to PPPoE, static IP, whatever your connection type is. In most cases it should be set "Obtain IP Automatically". This setting will allow your router to obtain a unique IP address from your ISP along with other configuration settings that will allow you to connect to the internet. Next look for an option where it says DHCP Server, enable it. define the scope (ip range) of your internal address (e.g. 192.168.1.2~100, 10.10.10.2~20). define client lease time (not really that necessary). If theres an option allowing you to configure your router as a gateway or router, choose gateway. this should get you up and going.

on your client computers, make sure to dot "obtain ip addresses automatically" as well as "obtain dns server addresses automatically". Hope this helps