step-to-step to networking

[baseoverhaulshop]

---

PAG CRASH COURSE NA LANG.... AKO NAG CRASH COURSE KO SA MAY ASILO CHURCH, CCTA

[[DSX]]

actually bisag usa ra lan card sa imo server ok ra. ani setup nimo

DSL modem
|
switch
|
|------- Server PC1
|------- PC2
|------- PC3
|------- PCn

say server ip address is 192.168.0.1 subnet is 255.255.255.0 gateway is the ip address of the modem on the lan
PC2 can be 192.168.0.2 subnet 255.255.255.0 gateway is 192.168.0.1
PC3 can be 192.168.0.3 subnet 255.255.255.0 gateway is 192.168.0.1
and so on...

[Kenchie]

actually bisag usa ra lan card sa imo server ok ra. ani setup nimo

DSL modem
|
switch
|
|------- Server PC1
|------- PC2
|------- PC3
|------- PCn

say server ip address is 192.168.0.1 subnet is 255.255.255.0 gateway is the ip address of the modem on the lan
PC2 can be 192.168.0.2 subnet 255.255.255.0 gateway is 192.168.0.1
PC3 can be 192.168.0.3 subnet 255.255.255.0 gateway is 192.168.0.1
and so on...

i think,depende ni sya sa imong provider if they will configure your cpe as a full-router or not.if they will,then what dsx suggest will work as long as your gateway and dns ip address sa imong laptops and pc's is your routers ip address.but if not,follow silwervhawk's suggestion.

[gtjr_ph]

unsa mani imo dsl modem usb type or rj45(lan) type?

[Tamblot]

good suggestion everyone! silverhawk's set up is ICS (internet connection sharing). DSX set up is NAT/Route mode.

Lets hear from the author of this topic if whats the set up of his modem.