Whos using a CPU cooler and Stock cooler whts your CPU temperature?

[nirdle_phogi]

---

well, my turn!

Stock Intel Heatsink Fan:

40~42c idle
53~55c load

Arctic Freezer 7 Pro with Tuniq TX-2 (given time to cure):

35~37c idle
45~53c load

this is in a non-airconditioned room. my rig has 3 intake 120mm fans, 120mm and 80mm rear exhaust as well as the 120mm exhaust from the PSU.

cool. nindota gud.., asa ta kapalit ana imo Freezer bro?

[poldopunk]

^ i bought this one from me_Bytes back then when he upgraded to Xigmatek. I dunno if napa ba nagbaligya ani ron.

take note this is used on an E4500 overclocked to 3.0 GHz (1.408 volts), default is 1.325 volts.

[Sasori]

cool. nindota gud.., asa ta kapalit ana imo Freezer bro?

APC bro naa pero mahal lng. i got the last stock of AC 7 Pro from Vinncent (buy&sell) too bad he's not selling this product anymore.

[moz_k2]

proc: e8500 3.16
cooler: Arctic Freezer 7 Pro
idle: 30
load: 37-40

[grss1982]

Sorry for reviving this thread pero I did'nt want to start a new one so I guess diri na lang ko post.

Anyways I have an Intel E6420 (2.13 Ghz) C2D that is using an All-Aluminum Stock Intel HSF and I have the following temps on each core:

34~36c when idle
54~56c on 100% load

NOTE: No Aircon, but case has good airflow. Also I got the temps using CoreTemp and CPUID Hardware Monitor.

Question: Is that the normal temp for this processor when using Stock HSF? It seems pretty hot to me. BTW, the reason I'm asking is because I heard the C2D Processor actually comes with the Stock Intel HSF that has a copper core and NOT the All-Aluminum Stock Intel HSF. I bought my processor second hand man gud and it didn't come with the HSF so I just borrowed the Stock Intel HSF of my friend's non-functioning rig which has an Intel Celeron 347 3.06Ghz Cedar Mill.

[faxy]

ako kai AMD x2 5000+ not overclock, kung stock kai mo idle kog 40-43 degrees, full load wa nako gi suwayan kai hadlok ko..

palit dayun kog Evercool Vaspid.. karon mo idle kog 31-34 degrees dayun full og 47-48 degrees no aircon na...

[karp miharby]

naglibog ko mga idol. noob man gud ko aning mga butanga.
unsa inyong gipost per core na cya or dli?

nagcheck pud ko sakoa gamit ang CPUID HW Monitor ug kanang PC probe na pakapin sa ASUS ug mao ni akong result:



Ang sa left kay sa CPUID HW Monitor then ang sa right kay sa PC probe. Tan-aw nako murag total ang nigawas sa PC probe kay usa ra man kaha ang physical na proc ani. sak2 ba? Dako ra ba au ang 49? Idle ni cya pagkuha nako.

Thanks sa mga moreply!

[poldopunk]

very interesting...post your system specs and your cooler as well.

you either have a bad sensor on the cores or there's not much airflow on your chassis since the TCase temp is too high from Hardware Monitor.

again, what processor is this?

**edit**

also, start a new thread. this is off-topic here.

[handsoff241]

naglibog ko mga idol. noob man gud ko aning mga butanga.
unsa inyong gipost per core na cya or dli?

nagcheck pud ko sakoa gamit ang CPUID HW Monitor ug kanang PC probe na pakapin sa ASUS ug mao ni akong result:



Ang sa left kay sa CPUID HW Monitor then ang sa right kay sa PC probe. Tan-aw nako murag total ang nigawas sa PC probe kay usa ra man kaha ang physical na proc ani. sak2 ba? Dako ra ba au ang 49? Idle ni cya pagkuha nako.

Thanks sa mga moreply!

INIT! nganu in-ana man na bro? giunsa na nimo?

[chagorio]

amd phenom 8450 @2.5MHz using CM hyper 212