what will be good n nice mobo & mem for my Q8200

[xavisimao]

if asus bro go for asus p5q-e or deluxe

deluxe is priced at 11k+

sa memory pangitaa ang thread ni lunch sa buy and sell naa siya mahatag nice memory kaw nlng pili

+1

[kabz]

dfi lan party board then get ocz xtc 1066 4gig kit nice kaau..........

[isyot_daut]

g skill pi series for ram...

[butchix]

@all
thanks mga mazterz. i will start canvassing
sa inyo mga suggestions.

more powers....

[Layan]

P5Q bro I think below 10k and RAM get OCZ 2 X 2GB PC8500 DDR2...I think mga 3-4k pud. sakto sa 10k nimo nga budget.

I agree...Asus P5Q. sa rams... Crucial and Corsair would be great.

maw ni mobo nako gamit. and got dem this baby can OC my Q6600 up to 4ghz on Air... ^_^

validate:

[poldopunk]

^ is that 1.552volts? 4GHz but the insane amount of voltage it needed to get it. i bet its somewhere around 3.4 ~ 3.6 if you put it below 1.5 volts, right?

[Layan]

^ is that 1.552volts? 4GHz but the insane amount of voltage it needed to get it. i bet its somewhere around 3.4 ~ 3.6 if you put it below 1.5 volts, right?

Yep... 1.55v for a 4ghz... i only set this for max benching. 65nm Proc need alot of voltage than a 45nm. kaya ang mga 45nm mga low voltage. they only need 1.4ghz max.

but my Q6600 3.8ghz is stable @ 1.48v and I only use it for gaming.

My daily settings = 3.2ghz @ 1.25v stable. Must be always @ low voltage. para d nmn gano kawawa ang proc for daily settings.ehehe

[poldopunk]

45nms at 1.4 is still overvolting - as per datasheets of 45nms, its 1.3625 volts.

[Rainerius]

I agree...Asus P5Q. sa rams... Crucial and Corsair would be great.

maw ni mobo nako gamit. and got dem this baby can OC my Q6600 up to 4ghz on Air... ^_^

validate:

Zomg! Ilis ta sa akong Q6600 I will add 5 cases of beer. Cge na...

[Layan]

45nms at 1.4 is still overvolting - as per datasheets of 45nms, its 1.3625 volts.

Aw... Precise mn jud.ehehe