2009 Overclocking Competition

[centax error]

---

E6600 ako cpu and oc to 3.4ghz now..vcore-1.4v temp @ load: 56-57 deg ( safe pa ni?) sensya na mga bro..first time pa nko nag oc

Wa ko lingaw ganiha buntag..nangurso lang ko if makaabot ba jud ug 4.0ghz ang ako e660..dili jud mo boot bisan unsaon kun naa na sa 4ghz...3.968 ghz ra jud akong kutob @ 165+ vcore...igo ra nko gi pa run ang pi @1M unya pawng dayon and back to stock setting kay basin moaso nya..grabe kulba ganiha

[poldopunk]

^ i don't think you know what you're doing so STOP! it looks like you're already overvolting your processor. also, 3.968 is 4 GHz, fyi.

E6600 VID Range: .85 - 1.5V

http://processorfinder.intel.com/det...px?sSpec=SL9S8

Do this one more time without sufficient cooling and your processor's toasted.

[centax error]

Yes sir...sobra pa stop karon kay back to stock 2.4 ghz.. siguro from bios to windows and pi kay around 5-7 mins @ 1.65 volts


kani na oc bro safe ra ni siya 8 hours/per day?
3.4++ ghz?
vcore: 1.4
Cpu pll - 1.56
Dram Volt: 2.1
temp: 55-56 (airconditioned room)

na test ni nako sa prime 95 from 5 am - 9 am and no error. stop na lang nako kay have to go somewhere..

[poldopunk]

if you think you use your computer for 8 hours at full load, run an 8-hour prime95 test. make sure to enable error round off checking in prim95 or you're just wasting your time.

for 65nm processors, keep your temps below 65c. also, i don't play with CPU PLL, quite dangerous if you ask me.

**edit**

for your vcore, please post at least 2 decimal places, the rounding off applies here so if you're running 1.45+, drop it down since its good as 1.5

[centax error]

ok will run prime 95 for 8-hours..probably run it 10pm-7am ..I always enable the "round off checking" in prime as i have read it to do so on one of your post here...

I will keep note on the pll...tnx for all the tips and suggestion...

vcore- 1.42500 v

[box2joe]

wow! that's a lot of voltage bro! what CPU Cooler you were using?

[centax error]

@ boxjoe: contact freezer..btw, gigabyte ba to imong mobo bro? maybe can I ask u some questions

[poldopunk]

box2joe is using MSI P45 Platinum.

[isyot_daut]

@centax:
mau ni normal voltages sa ako mobo nga gigabyte

CPU PLL: 1.5
CPU Term: 1.2
MCH : 1.1
ICH 1.1

i also enabled my load line calibration para mawala ang vdrop...

[poldopunk]

^ for me, vdrop is good basta within specs. it was added there for a reason.