need inputs for silverstone st50f irregularity

[alert0]

---

i also thought it was my mobo at first. yaw kabalaka bro. wait lang for a week. naa na na. ako kay murag 3 days raman cguro to ko ga wait then nailisan daun.

[poldopunk]

akong voltages sa akong overclock nang-us-us pag-ilis sa PSU.

with the defective one, i needed 1.45v for 3.0 GHz, when it was replaced, 1.40v nalang. DAKO kaayo ang difference and with these changes, temperatures dropped as well.

Proc now idles at 33c and 36c respectively and goes to 53c for both cores on 100% load with Prime95 64-bit (6-hour test).

[alert0]

wow. mines proc temp idles at 16c and 17c.for both around 30c. aus ah. GPU (8800GT OC 512MB) is 48 to 51c when idle. ok na cguro.

[poldopunk]

OT:

16c and 17c? unsa imong cooler bro? airconditioned ang room? grabeh ka ubos gud.

[alert0]

dualcore amd 5200+ ra ako proc bro. bugnaw pud amo lugar pag gabii. . wala nay andar2x ang aircon.dugang lang na sa gasto.hehe

[poldopunk]

sounds like a defective sensor. too low if you ask me.

[alert0]

mao ba? im just using everest bro. ill try another one.

[poldopunk]

from the temps that you have, its either you're using a powerful cooler (thermalright, sunbream core contact) in an airconditioned room, otherwise, watercooled na siya nga temps but definitely not true for stock heatsink fans and the usual coolers you see around.

this proc seems to have bad batches on the thermal sensors, google around and you'll find lots of results with the same symptoms.

[isyot_daut]

bag-o lng mi nag install ako cuz og amd 4800+ ang iya temp sa core ky 18c lagi and 19c using stock hsf...hibong gud ko...heheh


Topic:

st50f user here..wala man blema ako..hehe

[alert0]

i think amd procs kay medyo bugnaw pag mag idle. karun kay its 23c,23c ang temp. and overall kay 30c.