Whos using a CPU cooler and Stock cooler whts your CPU temperature?

[dagski]

---

e6420 stock hsf + tuniq tx-2, not oced
idle: 44
load: 55

if oced to 3GHz+, +10 deg ang temp oi.

[k.A.i]

mao ni ako idle ug load using e8400 with stock cooler, wla ni OC kay di ko ganahan wahehe


P.S. kung init ra na pls ingna ko kay ahat nalang ko palit ug branded nga cooler

[Sasori]

inita ana bro oi 65-67*C ang temps, unsa nlng kha kung nka OCCT/Prime test ka ana.

[poldopunk]

@simoko: my dream board is in your system. T_T **i wish, i wish**

[harvz86]

Q6600 - idle around 35-37 depends on ambient temp., load is around 45ish... using Tuniq 120

[jhnpl]

Q9550 w/ Thermalright XP90c/IC Diamond 7 Carart -- OC to 3.1 ---> idle 40s....load 50s

[weezur]

E6400 OC'd to 3.0GHz, C1E enabled, no AC...

[k.A.i]

inita ana bro oi 65-67*C ang temps, unsa nlng kha kung nka OCCT/Prime test ka ana.

akoa ng gigamitan ug ORTHOS ang ilawm nga temp,

and dili na siya normal nga temp bro?

waaaaaaa

palit jud ko ahat ani cooler ron

[yugi]

akoa ng gigamitan ug ORTHOS ang ilawm nga temp,

and dili na siya normal nga temp bro?

waaaaaaa

palit jud ko ahat ani cooler ron

Bro as what I seen sa imong temps ok raman as of now if your system doesnt shows abnormality you dont have to worry about it. Buying a cpu cooler like what I did was the best thing to do coz when I am using a stock HSF I got 60C-70C on load/burn test so thats why I get a CPU cooler.

In your case its your choice and a good idea and good option too but I suggest dont do things in a rush test your system even for 1week burn test and see if something screwed up! you can compare, you can observe if your system is normal and functioning well even using a stock cooler and generic PSU's etc.. ELSE if something is wrong exist during the test thats the time for you to get a cooler and good PSU.

One thing, generic PSU's are not even closer to branded PSU's where you have a peace of mind. DUAL CORES, QUAD CORES usually needs more power so if you have good PSU your system is should be stable enough!

I hope it helps.

[loloyis.com]

Q9450 @ 3.4Ghz using Zalman CNPS9700

idles @ 111°
loads @ 120°

hehehe...inita no...
readings are in Fahrenheit.
http://img230.imageshack.us/img230/7531/tempshy3.jpg