xtending connection

[hybrid_X]

yup. im asking now the suggessted hardware list to order.

[hybrid_X]

UCAV:

order list:

1pc PowerG8 WRAP 2511 : 200mW 802.11b Outdoor System (frm netgate)
sir should i also include the antenna w/ tripod dish in the list?

thats all?

[UCAV]

I am just a computer enthusiast. I played with wireless networking for 4 years now. It was way expensive before and the prices now are just right.


The hardware list

1. PowerG8 WRAP 2511 : 200mW 802.11b Outdoor System 1 unit http://www.netgate.com/product_info.php?products_id=148
[img width=500 height=500]http://www.netgate.com/images/WRAP-open-2.gif[/img]
all weather enclosure
2. Lightning Arrestor N-Male to N-Female 6 pcs http://www.netgate.com/product_info....products_id=49
3. 2.4 GHz Sectorized Omnidirectional Array Tri-Antenna Array can be sourced locally if none then http://www.hyperlinktech.com/web/sec...omni_array.php
with the N Female connectors

4. Cables CAT5e and Coax cable

optional
amplifier http://www.hyperlinktech.com/web/ha2401g.php

Its expensive maybe we can check some more suppliers if you are not in a hurry

[hybrid_X]

UCAV:

amplifier http://www.hyperlinktech.com/web/ha2401g.php has indoor and outdoor type. which one are you using?

hw many meters for CAT5e and Coax cable?

the modem router will be located at the ground floor of the building. most of the buildings here are two stories. yah right, too expensive. btw, how many subscribers do you xpect to have a clear signals?

[UCAV]

The Access Point can support 20-30 users with enough bandwidth.

To add users you need to add another access point.

Cables provisions for 50-100 meters

[hybrid_X]

20-30clients under 50-100 meters away from the access point will do fine. it was great as i expected. btw, amplifier have 2 type? which one should we use? and the cables length?

[UCAV]

modem and router will be at the ground floor and also the switch

even the Access point can be located indoor if you want since the antenna will be connected to the access point only the antenna will be outdoor

for the amplifier we need the out door kind


cables we need 50-80 meters coax cable. We need quality coax to avoid signal loss

[hybrid_X]

i tink i have the order finals. il try to call my aunt tonight if when niya madeliver ang hardware. hopefully makastart ta 2-3 weeks after. kong freelance ka mas nindot kay dili ta magconflict sa schedule. inform you tomorrow kong unsay response. thanks. by the way naka order ka sa tshirt? karon pa ko kakita and mag order ko 2 shirt. ;p

[UCAV]

We also need Power over ethernet adapter

http://www.dlink.com/products/?sec=1&pid=368

And Power over ethernet switch.

http://www.netgear.com/products/details/FS108P.php

[UCAV]

Sir,

Maybe we don't need the antenna. Do you plan to have subscriber all around you home 360 degrees. or just infront?