Mod Heaven (not where moderators go after they croak)

[ryantanchan]

refreshing for a hot day....hahahahhaha

[fireice2]

So, hot... pwede makirefresh din?

[ryantanchan]

Cable management....still lots of wires...modular psu needed...

[poldopunk]

hehehehe...good one "cable management".

[Nammies]

Venomous kaayo tanawon ang uban noh.. naa pa gyud kingsnake!

[isyot_daut]

lolz..abi nako wati ra....kingsnake man jud...hehe

[pangitko79]

the biggest challenge in building a computer system is cable management...

[EntrePinoy]

bitaw bitaw. chaktu. sakita tan awon sa mga wires oi..

[fireice2]

need mo sleeved PSU. Actually mahirap talaga cable mgt sa Antec 900.

[poldopunk]

Hi everyone, I need your opinion. First of all, this is my chassis. (Luster)

The chassis has 4 fan locations, bottom front, upper left side, lower left side and top rear. All of these fans are sized 120mm and they're all filled up right now.

What I want to know is, what would be the best setup for the system. I currently have bottom front, upper and lower left side as intake and top rear as exhaust (not to mention the generic PSU) - positive air pressure.

Would it be a lot better if I setup all 3 fans (2 x side fans, top rear) as exhaust and let front bottom handle the intake? This would create negative pressure while keeping dust off the case.

Another option I'm thinking is front intake, lower side fan as exhaust (graphics card), upper side intake and top rear as exhaust for the processor. This creates a balanced air pressure, I believe.

Thanks...