LAN problem

[AMD_infinium05]

---

start > run > NETSETUP

but before you do that... ensure IP addresses, subnet masks and etc are right. gud luck

[wurrmed]

im almost giving up and will do the last resort to buy lan card, nagreformat ko balik
then try lain xp installer but mao ra jud gihapon mo show ra gihapon sa systray nga connected
but dili maping sa tanan pc and dili sad ka ping sa tanan kani ra jud nga unit ang naa problem
turned off jud ang windows firewall ma ping man sad niya ang own IP na assign.
Will try kana netsetup

[Chipmunk888]

im almost giving up and will do the last resort to buy lan card, nagreformat ko balik
then try lain xp installer but mao ra jud gihapon mo show ra gihapon sa systray nga connected
but dili maping sa tanan pc and dili sad ka ping sa tanan kani ra jud nga unit ang naa problem
turned off jud ang windows firewall ma ping man sad niya ang own IP na assign.
Will try kana netsetup

thats quite weird, if you successfully ping out 127.0.0.1 then the system of the card is fully working and fine.



what is your topology anyway?

[AMD_infinium05]

im almost giving up and will do the last resort to buy lan card, nagreformat ko balik
then try lain xp installer but mao ra jud gihapon mo show ra gihapon sa systray nga connected
but dili maping sa tanan pc and dili sad ka ping sa tanan kani ra jud nga unit ang naa problem
turned off jud ang windows firewall ma ping man sad niya ang own IP na assign.
Will try kana netsetup

ayaw ana bro, sit down aside if dili madala today, drink some coffee and have fun. then just go back. quitters never win

[AMD_infinium05]

i have even tried troubleshooting whole network in almost a week, i didnt stop and I won, found out the problem(s)... found it by myself... suggestions of other people didnt work.

[nissanss]

as suggested early on, make sure ur physical lan card is A ok. either by swapping it to a known good working one or getting a new one. they don't cost that much anyways. and if it's not it then u can always keep it as spare and for troubleshooting purposes. for me, that should have been what i did next after ensuring all settings are correct and the wirings are good. i mean, ur already pulling ur hair out but u have not tried isolating the card yet. do that now and come back here if it is still not working. lots of people giving u advices here. advance ones even. downtime is productivity lost is money wasted. hear from u soon.

[pridi]

if nag reformat naka and naa japon nga sakit, den sayop ang gi tambal cguro.... try isolating another possibility