intel chipset to via

[Poor_Prince23]

---

Heres are the steps without re-install the OS.

Device Manager
IDE ATA/ATAPI controllers
Primary IDE Channel
Secondary IDE Channel
Intel Bus Master IDE Controller <<< Double Click

Double click then goto Driver tab, Click Update Driver.
Choose: install from a list or specific location(Advanced), Click Next.
Choose: Don't search. I will choose the driver to install, Click Next.
Choose: Standard Dual Channel PCI IDE Controller, Click Next. ( It will update the driver )
Completing the hardware update wizard, Click Finish.
System Settings Change, Click Yes. ( If you click No, it will back the original driver )
Shutdown your pc then replace your intel mobo to Via mobo.
After you replaced the VIA mobo the windows will continue update the drivers... and so on.

-end-

cool! question lang, how do you get to this part since di man sya maka access safe mode (mo reboot)
sa ako nasuwayan unless mag OS reinstall dli maka boot with the new mobo or mo blue screen...
sakto? thanks!

[istoryanimo]

it's ok since i wont be using the ide controller from the previous chipset, it really won't matter.

ah ok your using sata.

[istoryanimo]

Re-install... Testing... until you succeed.

You have to change 1st the existing driver controller ( VIA, Intel, Nvidia, NForce, etc. ) then select Standard Dual Channel PCI IDE Controller from your OS. If you dont, the blue screen will appear then restart.

Poor_Prince23 wrote:

" cool! question lang, how do you get to this part since di man sya maka access safe mode (mo reboot)
sa ako nasuwayan unless mag OS reinstall dli maka boot with the new mobo or mo blue screen...
sakto? thanks!"

[saulrhyz]

plug in into a similar chipset board first poorprince

[Poor_Prince23]

sakto! thanks

[saulrhyz]

hehehehe no problem.

[rkc_888]

yeah pwede ra if similar mobo chipset. but it cannot remove the existing/installed/software drivers. ang purpose kani na setup lang.. aron dili nalang mo re-install ang OS kapuyan naman.

[duneman]

yeah pwede ra if similar mobo chipset. but it cannot remove the existing/installed/software drivers. ang purpose kani na setup lang.. aron dili nalang mo re-install ang OS kapuyan naman.

have you read what had been posted? or you dont know what youre talking..

[STEEL_ICON]

Method 1
1. Download Hiren's Boot CD 9.4 or better.
2. Burn the ISO to CD.
3. Connect the said HDD to a good PC.
4. Boot from Hiren's Boot CD.
5. Go to Registry Tools. Any will do.
6. Locate the Registry Hive from the HDD.
7. Load the Registry Hive. Delete all references to drivers. Delete the HCC\System\CCS\ENUM tree, the WHOLE tree.
8. Save the Registry Hive.
9. Reboot. The ENUM Tree is the reference to all your drivers.

Method 2
Do the same steps as above from 1 to 4. This time launch GhostWalker SID changer. Change the SID of the Windows Installation. Reboot.

This will help if done properly.